Kuppersberg WL-MOTUBA - Инструкция по эксплуатации - Страница 24

24

TECHNICAL PASSPORT

ENGLISH

Cooker hood

socket and/or a hole for the passage of 

the discharge tube).

Expansion wall plugs are provided 

to secure the hood to most types of 

walls/ ceilings. However, a qualified 

technician must verify suitability of the 

materials in accordance with the type of 

wall/ceiling. The wall/ceiling must be 

strong enough to take the weight of the 

hood. Do not tile, grout or silicone this 

appliance to the wall. Surface mounting 

only.

*contingent on the model

O P E RAT I O N

Use the high suction speed in cas-

es of concentrated kitchen vapours. lt 

is recommended that the cooker hood 

suction is switched оn for 5 minutes 

prior to cooking and to leave in opera-

tion during cooking and for another 15 

minutes approximately after terminat-

ing cooking.

The hood operation is controlled by a 

combined switch.

Buttons “-” and “+” - are used to adjust the 

fan speed from 1 to 4.

1. Button “-” - pressing decreases the fan 

speed.

2. Button “+” - pressing increases the fan 

speed.

3. Display

4. Clock button ( ) - allows you to program 

the time turn off the fan.

5. Light button - switches the hood light 

on and off, regardless of the fan operation.

This regulation contributes to the selec-

tion of the optimal fan speed with mini-

mal noise.

Program function

 (cooker hood swi-

tchoff time programming button)

;

Timer:

 you саn program the hood 

fan to switch off automatically at any 

time you choose between 10 and 90 

minutes at 10-minute intervals.

- То еnаblе this programming func-

tion, press the “+” button to switch the 

hood fan to the chosen mode, and then 

press the fan switch-off time program-

ming button.

- А blinking “0” will арреаг оп the 

panel to indicate that the time pro-

gramming has started.

- Enter the automatic fan switch-off 

time using the “+” button, taking into ac-

count that the number indicated оп the 

panel multiplied Ьу the 10-minute time 

interval corresponds to the time of the 

hood fan’s Late switch-off (for example, 

the number 1 = 10 minutes, the number 

2 = 20 minutes, the number 3 = 30 min-

utes, etc.)

- After selecting the required Late 

switchoff time interval, you must con-

firm your choice Ьу pressing the hood 

switch-off time programming button 

again, the panel will stop flashing and 

show the previously selected mode, 

and the flashing point in the mode will 

count down the remaining time un-

til the hood fan is turned off. You сап 

disaЫe the automatic fan switch-off 

function Ьу pressing the hood switch-

off timer button during the countdown 

of the remaining time.