Kuppersberg Slimlux II 60 XGL - Инструкция по эксплуатации - Страница 4

4

TECHNICAL PASSPORT

ENGLISH

Integrated extractor hood SLIMLUX II



Do not leave gas burning without 

a pan above it under the hood.



Do not allow grease to 

accumulate in any part of the extractor, 
especially  in  the  fi lter  as  this  COULD 
PRODUCE A FIRE RISK.



Before installing the extractor 

consult local rules and regulations in 
force with respect to current standards 
on air and fumes.



Before connecting the extractor 

to the mains, check that both the 
voltage and the frequency conform to 
that shown on the characteristics label 
of the extractor located inside it.



We recommend the use of gloves 

and caution when cleaning the inside of 
the extractor.



Your extractor is designed for 

domestic use and only for expelling 
and purifying gases arising from food 
preparation. Its use for any other purpose 
must be at your own responsibility and 
may be dangerous.



This device includes a security 

component that cuts it off the power 
when you remove the main fi lter.



You should contact the nearest 

Qualifi ed  Technical  Assistance  Service 
for any repairs always using original 
spare  parts.  Repairs  and  modifi cations 
carried out by others could damage the 
apparatus or cause it to malfunction, and 
risking your safety. The manufacturer 
cannot be held liable for inappropriate 
use of the apparatus.

3.  E N V I RO N M E N TA L 

P ROT E CT I O N

Disposal of the packaging

The packaging bears the Green Point 

mark.

Dispose of all the packaging 

materials such as cardboard, expanded 

polystyrene and plastic wrapping in the 

appropriate bins. In this way you can be 

sure that the packaging materials will 

be re-used.

Disposal of equipment 

no 

longer used

According to European Directive 

2002/96/EC on the management 
of waste electrical and electronic 
equipment (WEEE), home electrical 
appliances should not be put into the 
normal systems for disposal of solid 
urban waste.

Outdated appliances should be 

collected separately to optimise 
component material recovery and 
re-cycling rates and to prevent