Kuppersberg Inlinea 70 LX - Инструкция по эксплуатации - Страница 16

16

TECHNICAL PASSPORT

ENGLISH

Extractor hood

Carbon  filter  is  designed  to  trap 

odors and fumes while cooking. It is used 
in cases where there is no possibility 
to connect the air cleaner to a special 
ventilation duct for discharging air 
outward. When operating the appliance 

with a carbon filter, contaminated air is 

sucked into the appliance and passes 

through a carbon filter, and then clean 

air is supplied to the kitchen.

The carbon filter should be replaced 

at regular intervals. The interval of 

filter  replacement  depends  on  the 

frequency of use of the air cleaner, 
style of cooking and frequency of the 

aluminum  filter  cleaning.  Generally,  it 

is recommended to replace the carbon 

filter once every 4 months.

How to remove carbon filter:

1. Remove aluminum filters.
2.  Turn  the  carbon  filter  to  the  left 

and pull it.

3. Replace the old carbon filter with 

the new one.

4. Put the filter back into place.

If necessary, clean the outside of the 

air cleaner with a soft, damp cloth. Do 
not use any abrasive cleaning agents. 
For painted stainless steel surfaces: to 
avoid scratching it is recommended to 
wipe them with a soft, damp cloth in 
the painting direction. Do not remove 
the lamp cover during the surface 
cleaning process.

Caution!

Do not use the steam generators 

for cleaning.

Caution!

Not  following  the  above  rules  for 

cleaning the appliance and replacing 

filters may cause fire.

Replacing lamps

Before replacing lamps, disconnect 

the appliance from the power supply. 
Then, with a screwdriver, pry and remove 
the lamp cover, while supporting it 
from below. Remove the burned-out 
lamp and replace it with a new one. 
Put the lamp cover into place, press it 

slightly and fix it. Caution: do not touch 
the  halogen  lamp  with  your  fingers,  it 
significantly  reduces  its  lifetime.  Use  a 

soft, dry cloth.

Caution!

If  you  need  to  transport  the  air 

cleaner,  first  of  all,  disconnect  it 
from  the  power  supply  and  proceed 

with disassembly. It is recommended 
that you transport it in the original 

packaging.  If  this  packaging  is  not 

available, package the appliance using 
materials that prevent possible damage 

resulting from transportation.