Страница 14 | Kuppersberg Inlinea 70 LX - Инструкция по эксплуатации

Вытяжки Kuppersberg Inlinea 70 LX - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

Загружаем инструкцию

TECHNICAL PASSPORT

ENGLISH

Extractor hood

the assembly and installation of the
appliance is completed.

8. Do not use the appliance

without the aluminum filter in place.

9. Do not touch the lamps.
10. Do not remove the aluminum

filter while the appliance is in

operation.

11. Do not disconnect the

appliance from the power supply
system directly. If necessary, turn
the appliance off using the control
panel and, only after that, unplug
it from the power supply system.

When switching on: first connect

the appliance to the power supply
system, then switch it on using the
control panel, but not vice versa!

12. The appliance requires regular

cleaning and maintenance work.

13. When installing the appliance,

observe the required distance
between it and the cooking surface
of your stove:

- for an electric stove: at least 65

- for a gas or gas-electric stove: at

least 70 cm

14. Do not allow children to play

with packaging materials, it can be
dangerous!

15. The appliance is allowed to be

turned on only once the pots and/or
pans are placed on the stove.

16. For best air cleaning in

your kitchen, do not turn off the
appliance immediately after the
cooking process is completed: let
the appliance run for a further 15
minutes. For this purpose you can
also use the timer function (the

button «Auto Switch Off Timer» on

the control panel).

17. Ensure adequate ventilation in

the kitchen, if a gas stove is operated
simultaneously with the appliance.

18. In case of any malfunctions,

contact your nearest authorized
service center.

19. If the kitchen hood is

supposed to operate in air discharge
mode, then during installation it is
important to provide a duct of the
corresponding diameter. To prevent
loss of performance caused by
aerodynamic resistance of the duct,
the air duct must not be too long, or
curved. Never restrict the duct size,
or make sharp bends. In addition,
it is preferable to use smooth PVC

duct (round or flat), rather than the
flexible corrugated one because

bends of a corrugated duct increase
the noise level of the hood.

20. The manufacturer does not

bear any responsibility for any
possible damage, in case of non-
compliance with above precautions.