Kuppersberg Inlinea 70 LX - Инструкция по эксплуатации - Страница 15

15

ENGLISH

TECHNICAL PASSPORT

Extractor hood

Mechanical control (buttons)

А – «Lighting» button

В – «0» button

С – «1» button

D – «2» button

E – «3» button

«Lighting» button – Lighting On/Off

«0» button - hood motor On/Off

«1»  button  -  motor  rotation  speed  1 

(initial level)

«2» button - motor rotation speed 2

«3» button - motor rotation speed 3

S E CT I O N   2.

Mounting and dimensions

Please unpack and inspect the 

appliance! Before starting installation, 
make sure that the hood has no 
obvious transport damages. If such 
defects are detected, do not install or 
connect the appliance to the mains.

S E CT I O N  3.

Cleaning and maintenance

Caution!  Before  you  start  cleaning 

the  appliance,  disconnect  it  from  the 

power supply.

Aluminum filter

Aluminum  filter  is  designed  to  trap 

grease  particles  out  of  the  flow  of  air 

running through it. For this reason, 

the  filter  needs  regular  cleaning.  The 

cleaning interval depends on the 
frequency of use of the air cleaner. 
Generally, it is recommended to clean it 
once a month.

To  do  this,  remove  the  filters,  wash 

them in water with a neutral liquid 
detergent, dry them, then set them back 

in the air cleaner. Over time, filters may 

change color due to a regular washing. 
This is a natural process, which does not 

indicate  a  defect,  so  filter  replacement 

is not required.

The aluminum filters can be washed 

in the dishwasher.

How to remove aluminum 

filters:

1. Press on the latch of the filter lock.

2. Pulling down a bit, remove the 

filter.

In  order  to  put  the  filters  in  place 

after cleaning, follow the above 
instructions in reverse order.

Carbon filter (used in 

recirculated air mode)

I N L I N E A  70  /  52