Gaggenau AW 560-191 - Инструкция по эксплуатации - Страница 21

Saturation indicator

21

Operating procedure

The most effective method of removing

vapours produced during cooking is to:

❑

Switch the ventilator ON

as soon as you begin cooking.

❑

Switch the ventilator OFF

a few minutes after you have finished
cooking.

Switching the fan ON:

❑

Press the 

1, 2 

or

3

button or pull out the

filter drawer.

If you pull out just the filter drawer,
the fan switches to setting 2.

Switching the fan OFF:

❑

Press the 

0

button

.

Intensive setting:

Maximum power is obtained at the 
intensive setting. It is only required for short
intervals.

❑

The 

Int

key for the intensive level

should be pressed when browning
and frying in an open pan.

If you have switched on the hood by 
selecting the intensive level, it will be
switched off again automatically after 
5 minutes.

❑

If you press the 

Int

key while the hood is

running at fan level 

1, 2

or 

3,

the 

electronic control will switch back 
automatically to the previously selected
fan level after 5 minutes.

❑

If you would like to end the intensive level

before

the five minutes have elapsed,

press the 

0

key (“Motor off”) or select a

different level. It is possible to switch off
the extraction function at any time by
pressing the 

0

key (motor “off”).

Special functions:

Intensive time:

❑

You can set the intensive level running
time to 3, 5 or 10 minutes by simulta-
neously pressing the 

Int

key and the 

1, 2

or 

3

key and you can store this 

setting. When delivered, the appliance is
set to five minutes, i.e. the combination
of the 

Int

key and the key 

2.

Fan follow-on:

❑

Delayed shut-off is possible at any level.
First press the required key 

1, 2, 3

or 

Int

and then press the 

key.

The delayed shut-off time for all levels is
ten minu-tes. After these ten minutes,
the ventilation switches off, but the
lighting stays on.

Interval ventilation:

❑

Interval ventilation is a special feature of
this appliance which periodically 
activates the fan for five minutes every
hour. You can activate this function by
simultaneously pressing the 

0

key and,

depending on the required extraction
capacity, the 

1, 2

or 

3

key.

This mode of operation is indicated by
alternating illumination of the 

key

together with the corresponding fan level
indicator. 

You can switch off interval ventilation by
pressing the 

0

key.

Lighting:

❑

Briefly press the 

button to switch the

light on and off.

❑

The light can be switched on at any
time, even though the fan is switched off.

❑

Adjusting the brightness:

Hold down the 

button until the 

desired brightness is obtained.

Light

Fan OFF

Intensive setting

Fan follow-on

Fan settings