Falmec Prisma 115 - Инструкция по эксплуатации - Страница 19

17

English

With the Timer function activated, the hood can be switched-off by the operator in any 
case and the function will be deactivated. 

The Timer function remains associated to a velocity. A change in the velocity, with the 
Timer function activated, will deactivate it.

2: 1st 

Velocity

 When 

the 

LED is switched-off

, non-prolonged pressing of the key will switch-on the hood 

at the 1st velocity and illuminate the respective LED. The function will switch-on when the 
Key is released.

 When 

the 

LED is switched-off and another velocity is activated

, pressing the Key will 

imply selection of the 1st velocity, switching-on of the respective LED and switching-off of 
the LED associated with the velocity that was previously selected.

 When 

the

 LED is on, pressing 

the Key will imply the switching-off the LED and MOTOR.

 When 

the 

LED is switched-off, prolonged pressing

 (at least 3 seconds) of the Key will 

cause activation of the recirculation function. During the recirculation function (with a 
duration of 24 hours), the 

LED will flash

. From the activation of this function, the hood will 

remain switched-on for one hour at the 1st velocity, after which it will switch-off for 3 hours 
and then reactivate for another hour. These cycles are repeated until the timeout. 

With this function activated, the other functions cannot be selected. To remove this func-
tion, keep Key 2 pressed for at least 3 seconds.

3: 2nd 

Velocity

 When 

the 

LED is switched-off and another velocity activated

, pressing the Key (either 

prolonged or not) will imply the selection of the 2nd velocity, switching-on of the respec-
tive LED and switching-off of the LED associated with the velocity that was previously 
selected.

 When 

the 

LED is switched-off and no velocity activated

, pressing the Key will have no 

effect.

 When 

the 

LED is switched-on, pressing the Key 3

 will have no effect.

To switch the hood off, it will be necessary to firstly select the 1st velocity and then repress 
the same Key. 

4: 3rd 

Velocity

 When 

the 

LED is switched-off and another velocity activated

, pressing the Key (either 

prolonged or not) implies the selection of the 3rd velocity, the switching-on of the re-
spective LED and switching-off of the LED associated to the velocity that was previously 
selected.

 When 

the 

LED is switched-off and no velocity activated

, pressing the Key will have no 

effect.

 When 

the LED is switched-on, pressing the Key 4

 will have no effect.

To switch the hood off, it will be necessary to firstly select the 1st velocity and then repress 
the same Key.

5: 4th Velocity

 When 

the 

LED is switched-off and another velocity activated

, pressing the Key (either 

prolonged or not) implies the selection of the 4th velocity, switching-on of the respective 
LED and switching-off of the LED associated to the velocity that was previously selected.

 When 

the 

LED is switched-off and no velocity activated

, pressing the Key will have no 

effect.

 When 

the 

LED is switched-on, pressing the key 5

 will have no effect.

The forth velocity must remain on for a maximum of 7 minutes, after which, one must 
return to the third.

To switch the hood off, it will be necessary to firstly select the 1st velocity and then repress 
the same key.

6: Light 
 

Briefly pressing key T6 will turn the light on and off. The T6 key will light up if the light is on.