Falmec LIGHT 180 - Инструкция по эксплуатации - Страница 17

17

ENGLISH

MAINTENANCE

Before cleaning or carrying out maintenance operations, discon-

nect the equipment by removing the plug or switching off the 

main switch.

Do not use detergents containing abrasive, acidic or corrosive substances 

or abrasive cloths.

Regular maintenance guarantees proper operation and performance over time.
Special attention is to be paid to the 

metal anti-grease filters

: frequent clean-

ing of the filters and their supports ensures that no flammable grease is accu-
mulated.

CLEANING OF EXTERNAL SURFACES

You are advised to clean the external surfaces of the hood 

at least once every 

15 days

 to prevent oily substances and grease from sticking to them. 

Alternatively 

and for all the other types of surfaces

, it can be cleaned using a 

damp cloth, slightly moistened with mild, liquid detergent.
Finish off cleaning by rinsing well and drying with soft cloths. 

Do not use too much water next to the push button control pan-

el and lighting devices in order to prevent humidity from reach-

ing electronic parts.

The glass panels can only be cleaned with specific, non-corrosive or non-abra-
sive detergents using a soft cloth.
The Manufacturer declines all responsibility for failure to comply with these in-
structions.

CLEANING OF INTERNAL SURFACES

It is forbidden to clean electrical parts, or parts related to the mo-

tor inside the hood, with liquids or solvents.

For the internal metal parts, see the previous paragraph.

METAL ANTI-GREASE FILTERS

It is advised to 

frequently

 wash the metal filters 

(at least once a month)

 leav-

ing them to soak in boiling water and washing up liquid for 1 hour, taking care 
not to bend them.
Do not use corrosive, acid or alkaline detergents.
Rinse them well and wait for them to be completely dry before reassembling 
them.
They are dishwasher safe.
To extract and insert the metal anti-grease filters see the assembly instructions.

ZEOLITE-CARBON FILTERS

Before performing maintenance on zeolite-carbon filters (FCZ), re-

move the lower dust filter (F) and vacuum any deposited dust with a 

vacuum cleaner.

In normal use conditions, we recommend regenerating the zeolite-carbon filter 
every 9 months and replacing it after 18 months. Simply place it in a domestic 
oven at a temperature of 200°C for approximately 2 hours to regenerate it.
Wait until the filter cools before reassembling it. 

LIGHTING

The range hood is equipped with high efficiency, low consumption LED lighting 
with extremely long duration under normal use conditions.
In case of failure, contact the Dealer or an authorised Servicing Department for 
repairs.

 DISPOSAL AFTER END OF USEFUL LIFE

The crossed-out wheeled bin symbol on the appliance means that 

the 

product is WEEE

, i.e. “Waste electrical and electronic equipment'', ac-

cordingly 

it must not be disposed of with unsorted waste

 (i.e. with 

''mixed household waste''), but it must be disposed of separately so 

that it can undergo specific operations for its re-use, or a specific treatment, to 
remove and safely dispose of any substances that may be harmful to the envi-
ronment and remove the raw materials that can be recycled. Proper disposal 
of these products contributes to saving valuable resources and avoid potential 
negative effects on personal health and the environment, which may be caused 
by inappropriate disposal of waste.
You are kindly asked to contact your local authorities for further information 
regarding the designated waste collection points nearest to you. Penalties for 
improper disposal of such waste can be applied in compliance with national 
regulations.

INFORMATION ON DISPOSAL IN EUROPEAN UNION COUNTRIES

The EU WEEE Directive was implemented differently in each country, accord-
ingly, if you wish to dispose of this appliance we suggest contacting your local 
authorities or dealer to find out what the correct method of disposal is.

INFORMATION ON DISPOSAL IN NON-EUROPEAN UNION COUNTRIES

The crossed-out wheeled bin symbol is only valid in the European Union: if you 
wish to dispose of this appliance in other countries, we suggest contacting your 
local authorities or dealer to find out what the correct method of disposal is.

WARNING!

The Manufacturer reserves the right to make changes to the equipment at any 
time and without prior notice. Printing, translation and reproduction, even par-
tial, of this manual are bound by the Manufacturer's authorisation. 
Technical information, graphic representations and specifications in this manual 
are for information purposes and cannot be divulged.
This manual is written in Italian. The Manufacturer is not responsible for any tran-
scription or translation errors.