Elica HIDDEN 2.0 IX/A/72 - Инструкция по эксплуатации - Страница 17

16 

EN - Instruction on mounting and use  

Closely follow the instructions set out in this manual. All 

responsibility,  for any eventual inconveniences, damages or 

fires caused by not complying with the instructions in this 

manual, is declined. This appliance is intended to be used in 

household and similar application such as: - staff kitchen 

areas in shop, offices and other working environments; - farm 

houses; - by clients in hotels, motels and other residential type 

environments; - bed and breakfast type environments.  

The hood can look different to that illustrated in the 

drawings in this booklet. The instructions for use, 

maintenance and installation, however, remain the same. 

•  It is important to conserve this booklet for consultation at 

any moment. In the case of sale, cession or move, make 

sure it is together with the product.   

•  Read the instructions carefully: there is important 

information about installation, use and safety.  

•  Do not carry out electrical or mechanical variations on the 

product or on the discharge conduits. 

•  Before proceeding with the installation of the appliance 

verify that there are no damaged all components. 

Otherwise contact your dealer and do not proceed with 

the installation. 

Note: The parts marked with the symbol "(*)" are optional 

accessories supplied only with some models or otherwise not 

supplied, but available for purchase. 

  Caution 

• Before any cleaning or maintenance 

operation, disconnect hood from the 

mains by removing the plug or 

disconnecting the mains electrical supply.  

• Always wear work gloves for all 

installation and maintenance operations. 

• This appliance can be used by children 

aged from 8 years and above and 

persons with reduced physical, sensory 

or mental capabilities or lack of 

experience and knowledge if they have 

been given supervision or instruction 

concerning use of the appliance in a safe 

way and understand the hazards 

involved. 

• Children shall not be allowed to tamper 

with the controls or play with the 

appliance.  

• Cleaning and user maintenance shall 

not be made by children without 

supervision. 

• The premises where the appliance is 

installed must be sufficiently ventilated, 

when the kitchen hood is used together 

with other gas combustion devices or 

other fuels.  

• The hood must be regularly cleaned on 

both the inside and outside (AT LEAST 

ONCE A MONTH). 

• This must be completed in accordance 

with the maintenance instructions 

provided. Failure to follow the instructions 

provided regarding the cleaning of the 

hood and filters will lead to the risk of 

fires. 

• Do not flambé under the range hood.  

• Do not remove filters during cooking. 

• For lamp replacement use only lamp 

type indicated in the 

Maintenance/Replacing lamps section of 

this manual. 

The use of exposed flames is detrimental 

to the filters and may cause a fire risk, 

and must therefore be avoided in all 

circumstances.  

Any frying must be done with care in 

order to make sure that the oil does not 

overheat and ignite. 

CAUTION:  Accessible parts of the hood 

may become hot when used with cooking 

appliances. 

• Do not connect the appliance to the mains 

until the installation is fully complete.  

• With regards to the technical and safety measures to be 

adopted for fume discharging it is important to closely follow 

the regulations provided by the local authorities. 

• The air must not be discharged into a flue that is used for 

exhausting fumes from appliance burning gas or other fuels.  

• Do not use or leave the hood without the lamp correctly 

mounted due to the possible risk of electric shocks. 

• Never use the hood without effectively mounted grids. 

• The hood must NEVER be used as a support surface unless 

specifically indicated. 

• Use only the fixing screws supplied with the product for 

installation or, if not supplied, purchase the correct screws 

type. 

• Use the correct length for the screws which are identified in 

the Installation Guide.