Elica GETUP NAKED/A/90 - Инструкция по эксплуатации - Страница 30

29 

Control Display B

T1.

  Light ON/OFF button 

T2 . 

Decrease intake speed / motor off button

L1.  

Speed indicator LED on

T3.  

Motor on / increase intake speed button 

T4 . 

"BOOST” – intensive speed - function button 

T1:

Light ON/OFF button 

to turn the light on and off. 
Press and hold button T1 to increase / decrease the intensity 
of the light. 

T2:

Decrease speed / motor off button 

press the decrease the intake power, until the extractor hood 
is turned off.

press and hold to turn the hood off directly.

L1:

Speed indicator LED on 

the central LEDs light up according to the intake speed 
active/used: 
1st speed, LED 

a

 will light up

2nd speed, LEDs 

a+b

 will light up

3rd speed, LEDs 

a+b+c

 will light up 

T3:  Increase speed button

press to turn the hood on  
press to increase the intake power.

T4:

"BOOST” – intensive speed - function button

press 

T4

 to activate the intensive intake speed “

BOOST 1

”, 

timed 

for 30 minutes

this prolonged timing has been designed to guarantee a 
suitable cooking time for preparations that release high 
amounts of smoke during cooking 

Note:

 after the 30 minutes, the hood will go back to the 

previously set intake speed *** 

with the motor on “BOOST 1”, press 

T4

 again to activate the 

intensive intake speed “

BOOST 2

”, timed 

for 7 minutes

Note:

 after the 7 minutes, the hood will go back to the 

previously set intake speed *** 

Note:

 press 

T4

 again, during the 7 minutes, to go back to the 

previously set intake speed *** 

with the “

BOOST1” and “BOOST2” functions active

, press: 

    T2

 to go back to the previously set intake speed *** 

    T3

 to go back to the 3rd intake speed 

*** the previous intake speed remains visible via the indicator 
LEDs 

L1 

if you have set the intensive speed directly with the hood off, 
the motor will be turned off after the set time. 

While using the “

BOOST

” functions, the 

T4

 symbol flashes 

(“BOOST 1”: white light - “BOOST 2”: blue light) 

Filter Saturation indicator lights 

At regular intervals, the hood signals the need to perform 
maintenance on the filters. 
LED

 L1

(a-b-c)

 on and flashing light (all indicator lights 

flashing together): perform maintenance on the grease filter. 

LED

 L1

(a-b-c)

 on and alternating light (the indicator lights 

turn on in sequence): perform maintenance on the active 
carbon filter  

Note: 

The filter saturation indicator is visible within the first 10 

seconds on turning on the hood; the saturation indicators must 
be reset within this time. 

Reset filter saturation indicator: 

Press and hold button 

T3

LED

 L1

(a-b-c)

 turns on and off (depending on the type of 

filter being reset, the indicator lights flash together or turn on 
in sequence); an acoustic signal will confirm the reset 
operation. 

Activation of filter saturation indicator 
Note:

 this operation must be performed with the hood off. 

- Grease filter 

This indicator is normally activated 
1st prolonged press of buttons 

T3

 and 

T2

if the indicator is active, button 

T3

 turns on 

press button 

T2

, to deactivate it 

if the indicator is not active, button 

T2

 turns on

press button 

T3

, to activate it 

- Active carbon filter 

This indicator is normally deactivated 
2nd prolonged press of buttons 

T3

 and 

T2 

if the indicator is active, button 

T3

 turns on 

press button 

T2

, to deactivate it

if the indicator is not active, button 

T2

 turns on

press button 

T3

, to activate it

Note: 

3rd prolonged press of buttons 

T3

 and 

T2 

 to ex i t s ettings  menu.