Elica GETUP NAKED/A/90 - Инструкция по эксплуатации - Страница 27

26 

provided regarding the cleaning of the 

hood and filters will lead to the risk of 

fires. 

• Do not flambé under the range hood.

• Do not remove filters during cooking.

• For lamp replacement use only lamp

type indicated in the

Maintenance/Replacing lamps section of

this manual.

The use of exposed flames is detrimental

to the filters and may cause a fire risk,

and must therefore be avoided in all

circumstances.

Any frying must be done with care in

order to make sure that the oil does not

overheat and ignite.

CAUTION:

Accessible parts of the hood

may become hot when used with cooking

appliances.

• Do not connect the appliance to the mains

until the installation is fully complete.

• With regards to the technical and safety
measures to be adopted for fume

discharging it is important to closely
follow the regulations provided by the

local authorities.

• The air must not be discharged into a
flue that is used for exhausting fumes

from appliance burning gas or other

fuels.

 WARNING!

 Failure to install the 

screws or fixing device in accordance 
with these instructions may result in 

electrical hazards.

• Do not use or leave the hood without the lamp correctly
mounted due to the possible risk of electric shocks. 
• Never use the hood without effectively mounted grids. 
• The hood must NEVER be used as a support surface unless
specifically indicated. 
• Use only the fixing screws supplied with the product for
installation or, if not supplied, purchase the correct screws
type. 
• Use the correct length for the screws which are identified in
the Installation Guide. 
• In case of doubt, consult an authorized service assistance

center or similar qualified person.  

 WARNING! 

Do not use with a programmer, timer,

separate remote control system or any other device 
that switches on automatically. 

When handling the hood do not put hands within the range of 
action of the pull-out suction panel (trolley)  
The hood is equipped with safety switches which inhibit 
operation when the front filter panel is unhooked. 

With the intention of constantly improving our products, we 
reserve the right to make all the changes in their technical, 
functional or design characteristics, deriving from their 
evolution. In case of the version with external motor, the 
normal operation of the hood requires the use of a suction unit 
(external motor) of the same manufacturer.  
When installing the product, it is recommended to keep a 
minimum distance of 400mm between the worktop and any 
components laid on top of the hood. 
This is to let the suction panel move upwards (opening) and 
downwards (closing) without any obstacles, and to facilitate 
access to the hood controls on the panel. 

WARNING: 

Put the metal box containing the electronic 

components at a distance not shorter than 65 cm from the gas 
hob or 65 cm from the hood suction point. 

RECOMMENDATION: 

We recommend you to install the 

metal box containing the electronic components at a distance 
of at least 10 cm from the ground and sufficiently from all the 
sources of heat (e.g.: side of an oven or hob). 
• This appliance is marked according to the European
directive 2012/19/EC on Waste Electrical and Electronic
Equipment (WEEE).
• By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the
environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. 

• The symbol 

 on the product, or on the documents

accompanying the product, indicates that this appliance may
not be treated as household waste. Instead it should be taken
to the appropriate collection point for the recycling of electrical
and electronic equipment. Disposal must be carried out in
accordance with local environmental regulations for waste
disposal. 
• For further detailed information regarding the process,
collection and recycling of this product, please contact the
appropriate department of your local authorities or the local
department for household waste or the shop where you
purchased this product. 

Appliance designed, tested and manufactured according to: 
• Safety: EN/IEC 60335-1; EN/IEC 60335-2-31, EN/IEC
62233.
• Performance: EN/IEC 61591; ISO 5167-1; ISO 5167-3; ISO
5168; EN/IEC 60704-1; EN/IEC 60704-2-13; EN/IEC 60704-3;
ISO 3741; EN 50564; IEC 62301. 
• EMC: EN 55014-1; CISPR 14-1; EN 55014-2; CISPR 14-2;