Ryobi (5133002663) - Инструкция по эксплуатации - Страница 5

3

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

 WARNING

If the product is dropped, suffers heavy impact or begins 
to vibrate abnormally, immediately stop the product and 
inspect for damage or identify the cause of the vibration. 
Any damage should be properly repaired or replaced by 
an authorised service centre.

To reduce the risk of injury associated with contacting 
rotating parts, always stop the machine, remove the battery 
pack, and make sure all moving parts have stopped:

●

before cleaning or clearing a blockage

●

when leaving the product unattended

●

before installing or removing attachments

●

before checking, maintaining or working on the 
product

●

if the machine starts to vibrate abnormally (inspect 
immediately)

BLOWER SPECIFIC SAFETY WARNINGS

■

Wear a face filter mask in dusty conditions to reduce 
the risk of injury associated with the inhalation of dust.

■

Slightly dampen surfaces in dusty conditions.

■

Do not point the blower nozzle in the direction of people 
or pets.

■

Never place objects inside the blower tubes.

■

Do not operate the product near open windows.

■

Use the full blower nozzle extension so that the air 
stream can work close to the ground and perform 
effectively.

■

Do not place blower on top of or near loose debris. 
Debris can be sucked into the intake vent, resulting in 
possible damage to the product.

TRANSPORTATION AND STORAGE

■

Stop the product, remove the battery, and allow it to 
cool before storing or transporting.

■

Clean all foreign materials from the product. Store the 
product in a cool, dry, and well-ventilated place that 
is inaccessible to children. Keep away from corrosive 
agents, such as garden chemicals and de-icing salts. 
Do not store outdoors.

■

For transportation in vehicles, secure the product 
against movement or falling to prevent injury to persons 
or damage to the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 
provisions and regulations.
Follow all special requirements on packaging and labelling 
when transporting batteries by a third party. Ensure that 
no batteries can come in contact with other batteries 
or conductive materials while in transport by protecting 
exposed connectors with insulating, non-conductive caps 
or tape. Do not transport batteries that are cracked or 
leaking. Check with the forwarding company for further 
advice.

MAINTENANCE

 WARNING

Use only original manufacturer’s replacement parts, 
accessories, and attachments. Failure to do so can 
cause possible injury and poor performance, and may 
void your warranty.

 WARNING

Servicing requires extreme care and knowledge 
and should be performed only by a quali

fi

 ed  service 

technician. For service, bring the product to an 
authorised service centre. When servicing, use only 
identical replacement parts.

■

To reduce the risk of injury associated with contacting 
rotating parts, always stop the machine, remove the 
battery pack, and make sure all moving parts have 
come to a complete stop:

●

before cleaning or clearing a blockage

●

when leaving the product unattended

●

before installing or removing attachments

●

before checking, maintaining or working on the 
product

●

if the machine starts to vibrate abnormally (inspect 
immediately)

■

Do not make adjustments and repairs not described in 
this manual. For other repairs, contact an authorised 
service agent.

■

After each use, clean the product with a soft dry cloth.

■

Check all nuts, bolts, and screws at frequent intervals 
for proper tightness to ensure that the product is in safe 
working condition. Any part that is damaged should be 
properly repaired or replaced by an authorised service 
centre.

■

Bring the product to an authorised service centre to 
replace damaged or unreadable labels.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still 
impossible to completely eliminate certain residual risk 
factors. The following hazards may arise in use and the 
operator should pay special attention to avoid the following:

■

Injury caused by vibration. Always use the right tool for 
the job and use designated handles.

■

Hearing injury caused by exposure to noise. Wear ear 
protection and limit exposure.

■

Injury from flying objects from the blow tube airflow. 
Wear eye protection at all times.

RISK REDUCTION

It has been reported that vibrations from handheld tools 
may contribute to a condition called Raynaud’s Syndrome. 
Symptoms may include tingling, numbness, and blanching 
of the 

fi

 ngers, usually apparent upon exposure to cold.