Ryobi (5133002663) - Инструкция по эксплуатации - Страница 4

2

| English

■

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are 
less likely to bind and are easier to control.

■

Use the power tool, accessories and tool bits etc. 
in accordance with these instructions, taking into 
account the working conditions and the work to 
be performed. 

Use of the power tool for operations 

different from those intended could result in a 
hazardous situation.

BATTERY TOOL USE AND CARE

■

Recharge only with the charger specified by the 
manufacturer.

 A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 
another battery pack.

■

Use power tools only with specifically designated 
battery packs.

 Use of any other battery packs may 

create a risk of injury and fire

■

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, 
nails, screws or other small metal objects that can 
make a connection from one terminal to another.

Shorting the battery terminals together may cause 
burns or a fire.

■

Under abusive conditions, liquid may be ejected 
from the battery; avoid contact. If contact 
accidentally occurs, flush with water. If liquid 
contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or 
burns.

SERVICE

■

Have your power tool serviced by a qualified repair 
person using only identical replacement parts.

 This 

will ensure that safety of the power tool is maintained.

CORDLESS BLOWER SAFETY WARNINGS

■

Some regions have regulations that restrict the use of 
the product in some operations. Check with your local 
authority for advice

■

Do not allow children, persons with reduced physical, 
sensory or mental capabilities or lack of experience and 
knowledge, or people unfamiliar with these instructions 
to use the product. Local regulations may restrict the 
age of the operator. 

■

Keep in mind that the operator or user is responsible 
for accidents or hazards occurring to other people or 
their property. 

■

Keep bystanders, children and pets 15 m away from 
the area of operation. Stop the product if anyone enters 
the area.

■

While operating the product, always wear substantial 
footwear and long trousers. Do not operate the machine 
when barefoot or when wearing open sandals. Avoid 
wearing clothing that is loose fitting or that has hanging 
cords or ties; they can be caught in moving parts.

■

Do not wear loose clothing or jewellery that can be 
drawn into the air inlet.  

■

Secure long hair so it is above shoulder level to prevent 
entanglement in moving parts.  

■

Wear hearing protection at all times while operating the 
product. The product is extremely noisy and permanent 
hearing injury may result if instructions to limit exposure, 
reduce noise and wear hearing protection are not 
strictly followed.

■

Wear full eye protection at all times while operating the 
product. The manufacturer strongly suggests a full face 
mask or fully enclosed goggles. Normal spectacles or 
sunglasses are not adequate protection. Objects can 
be thrown at high speed by the powerful air jet at any 
time and may rebound from hard surfaces toward the 
operator.

■

Before each use, ensure that all controls and safety 
devices function correctly. Do not use the tool if the off 
switch does not stop the product.

■

Before each use, always inspect the housing for 
damage. Ensure that guards and handles are in place 
and properly secured. 

■

Never operate the product with defective guards or 
shields, or without safety devices, such as debris 
collector, in place. 

■

Keep all cooling air inlets clear of debris.

■

Use rakes and brooms to loosen debris before blowing.

■

Clear the work area before each use. Remove all 
objects, such as rocks, broken glass, nails, wire, or 
string, which can be blown a considerable distance by 
high velocity air, or become entangled in the fan. 

GENERAL OPERATION

■

Operate the product only at reasonable hours – not 
early in the morning or late at night when people might 
be disturbed.

■

Do not operate the product in an explosive atmosphere.

■

Avoid using the product in bad weather conditions, 
especially when there is a risk of lightning.

■

Do not operate the product in poor lighting. The 
operator requires a clear view of the work area to 
identify potential hazards.

■

Use of hearing protection reduces the ability to hear 
warnings (shouts or alarms). The operator must pay 
extra attention to what is going on in the work area.

■

Do not get distracted, and always concentrate on the 
task.

■

Operating similar tools nearby increases both the risk 
of hearing injury and the potential for other persons to 
enter your work area.

■

Keep firm footing and balance. Do not overreach. 
Overreaching can result in loss of balance. 

■

Always be sure of the footing on slopes. Walk, never 
run.

■

Keep all parts of your body away from any moving part. 

■

Never run the product without the proper equipment 
attached.

■

Do not modify the product in any way or use parts 
and accessories that are not recommended by the 
manufacturer.