Einhell X-Change - Инструкция по эксплуатации - Страница 19

GB

- 19 -

batteries.

• 

Open the zipper on the catch bag (7) and 

shake out the material.

• 

Close the zip on the catch bag (7) again.

6.5 Speed control (Fig. 1)

The device is 

fi

 tted with an electronic speed con-

troller. To use it, turn the speed controller (Fig. 1/

Item 10) into the required position. Use the device 

only with the speed which is actually required and 

do not let it run at a speed which is faster than 

necessary.

7. Cleaning, maintenance and 

ordering of spare parts

Hazard!

Always remove the batteries before starting any 

cleaning work.

7.1 Cleaning

• 

After shaking out the catch bag, turn it inside 

out and thoroughly clean it in order to prevent 

mould and unpleasant odours from forming.

• 

You can use soap and water to clean out a 

heavily soiled catch bag.

• 

Rub a bar of dry soap across the zipper teeth 

if the zipper becomes difficult to pull.

• 

Clean the vacuum/blower tube with a brush 

upon evidence of dirt and grime.

• 

Dirt and grime can make the switch (blower/

vacuum) more difficult to operate as a result 

of the material that swirls up off the ground. 

When this occurs, simply flip the switch back 

and forth a few times, which should bring it 

back to the normal feel.

7.2 Maintenance

• 

Should the tool experience problems beyond 

those mentioned above, let only an autho-

rised professional or a customer service shop 

perform an inspection.

• 

There are no other parts inside the equipment 

which require maintenance.

8. Faults

The equipment does not work:

Check that the battery is charged and whether 

the charging unit is working. If the equipment will 

not work in spite of the voltage supply being OK, 

please send it to the customer service address-

below.

9.  Disposal and recycling

The equipment is supplied in packaging to pre-

vent it from being damaged in transit. The raw 

materials in this packaging can be reused or 

recycled. The equipment and its accessories are 

made of various types of material, such as metal 

and plastic. Never place defective equipment in 

your household refuse. The equipment should 

be taken to a suitable collection center for proper 

disposal. If you do not know the whereabouts of 

such a collection point, you should ask in your 

local council o

ffi

  ces. 

10. Storage

Store the equipment and accessories in a dark 

and dry place at above freezing temperature. The 

ideal storage temperature is between 5 and 30 

°C. Store the electric tool in its original packaging.

Anl_GE_CL_36_Li_E_Solo_SPK7.indb   19

Anl_GE_CL_36_Li_E_Solo_SPK7.indb   19

23.03.16   08:17

23.03.16   08:17