Einhell X-Change - Инструкция по эксплуатации - Страница 17

GB

- 17 -

4. Technical data

Idling speed n

0

 ........................  8,000-13,000 rpm

Air speed ................................................ 210 kph
Suction power .......................................  720 m

3

/h

Volume of catch bag ..................  approx. 45 liters
Sound volume level L

WA

 ....................  92.68 dB(A)

Uncertainty K  ........................................  3 dB (A)
Sound pressure level L

pA

 ....................  83.1 dB(A)

Vibration ahv ....................................... 2.354 m/s

2

Uncertainty K  ..........................................1.5 m/s

2

Weight  ........................................................3.3 kg

Important!

The equipment is supplied without batteries and 

without a charger is allowed to be used only with 

the lithium-ion batteries of the Power-X-Change 

series!

Power-X-Change

18 V, 1.5 Ah  .............................. 5 lithium-ion cells
18 V, 2.0 Ah ..............................  5 lithium-ion cells
18 V, 3.0 Ah  ............................ 10 lithium-ion cells
18 V, 4.0 Ah  ............................ 10 lithium-ion cells
18 V, 5.2 Ah  ............................ 10 lithium-ion cells

The lithium-ion batteries of the Power-X-Change 

series are allowed to be charged only with the 

Power-X charger.

Charger

Mains voltage  ....................200-250 V ~ 50-60 Hz

Output

Rated voltage ........................................  21 V d. c.
Rated current  ....................................... 3,000 mA

Keep the noise emissions and vibrations to a 

minimum.

• 

 Only use appliances which are in perfect wor-

king order.

• 

 Service and clean the appliance regularly.

• 

 Adapt your working style to suit the appliance.

• 

 Do not overload the appliance.

• 

 Have the appliance serviced whenever ne-

cessary.

• 

 Switch the appliance off when it is not in use.

• 

 Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in 

accordance with instructions, certain resi-

dual risks cannot be rules out. The following 

hazards may arise in connection with the 

equipment’s construction and layout:

1.   Lung damage if no suitable protective dust 

mask is used.

2.   Damage to hearing if no suitable ear protec-

tion is used.

3.   Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and 

maintained.

5. Before starting the equipment

The equipment is supplied without batteries 

and without a charger.

Warning!

Always remove the batteries before making 

adjustments to the equipment.

5.1. Mounting the suction tube (Fig. 3a-3f)

• 

Plug together the front and rear suction tube 

(Fig. 3a) and secure with the screw (Fig. 3b/ 

Item 12).

• 

Now slide the complete suction tube into the 

motor housing (Fig. 3c) and secure with the 

screws (Fig. 3d/ Item 12).

• 

Fit the two wheels (Fig. 3e/Item 9) into the 

wheel support (Fig. 3e/ Item 11). Make sure 

that there is an audible click when they en-

gage.

• 

Slide the wheel support (Fig. 3f/Item 11) onto 

the front suction tube as far as the stop (Fig. 

3f/Item D) and secure with the screw (Fig. 3f/ 

Item 13).

Note: Please note that the two vacuum tubes 

must always be joined together before they 

are mounted on the motor housing, and that 

they must never be taken apart when moun-

ted!

5.2. Mounting the catch bag (Figs. 4-5)

Hang the hook on the suction tube (Fig. 4A) and 

on the housing (Fig. 4b). Then slip the catch bag 

over the socket on the motor housing; it engages 

correctly when it makes an audible click (Fig. 5).

Anl_GE_CL_36_Li_E_Solo_SPK7.indb   17

Anl_GE_CL_36_Li_E_Solo_SPK7.indb   17

23.03.16   08:17

23.03.16   08:17