Timberk SWH RE9 80 V - Инструкция по эксплуатации - Страница 7

www.timberk.com • electrical storage water heater

7

*Does not included in the scope of delivery 

Water heater mounting methods

Fig. 6 shows the way to mount the water heater for several consumption 

points.

Water heater mounting

1. Power cord with a plug
2. Water heater
3. Check relief valve
4. Cold water supply valve*
5. Mixer*

Fig. 6

IMPORTANT! 

You can use the same way of installation for RE9. But, 

please, note that pipe of cold water (9) is on the left 

position. Pipe of hot water (2) is on the right.

NOTE:

Please, use accessories, provided by the manufacturer, 

to install the water heater. Electric water heater must 

not be mounted on a wall prior you make sure that the 

bracket is installed firmly and securely. Otherwise the 

electric water heater may fall down from the wall, which 

may cause its damage and even serious accidents 

involving bodily injury. When determining points for 

bolt holes, it is necessary to provision some spare 

space between the lower part of the water heater and 

the floor not less than 0.6 m, to make it convenient to 

perform maintenance if necessary.

6. Shower header*
7. Water main shut-off valve*
8. Pressure relieving opening
9. Water main
10. Bath tub*
11. T-bend*
12. Water outlet
13. Water inlet