Водонагреватели TESY GCR 802722 E31 ECW 304606 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
8
EN
5.
To connect the water heater to your home Wi-Fi network and then to
the Internet, please follow the steps below:
•
Open the Settings menu from the main screen
•
from Outdoor control choose Wi-Fi Scan
•
Select your local wireless Wi-Fi network and the password that you
use to protect it
•
Upon successful connection (30-40 sec.) you will see the message
“Successful connected to the Internet!”
Upon successful connection, please proceed with the other settings.
Note: With some models you may need more time to connect. You
should wait for few minutes before starting the procedure from
point 5 again.
Note: It is recommended to use WPA or WPA2 encryption, and if
your Wi-Fi modem is very old, use WEP encryption.
6.
Volume setting * (available for some models)
You have to set a volume in order for the calculator for consumed power
to operate correctly.
•
Choose from the
Settings menu > Volume
•
Choose from the drop down menu > the volume of your water heater.
Note: The water heater volume is indicated in the type plate on the
appliance.
•
Press the Save button to confirm the settings.
7.
Date and time setting:
•
from the
Settings menu
choose >
Time and date
•
from the drop down menu select Sofia, Bulgaria (or another location
depending which country you are in)
•
Press the
Submit
button to confirm the settings.
8.
Choose from the Settings menu >
www.mytesy.com
•
In the Account e-mail field enter the email address that you have
specified and confirmed in your registration on
https://www.mytesy.
com
. The other two fields Short description and Details are not
obligatory. You can use them to describe the appliance in a meaningful
way.
•
After entering the required parameters, save the settings by pressing the
Save button
.
9.
Protecting the Wi-Fi network of the water heater is recommended.
•
From the Settings menu choose > Indoor control
•
Slide the Off button until On appears
•
In the Encryption Key field enter a password consisting of 8 to 40
symbols without intervals
•
Press the Submit button to confirm the password.
Note: Once entered the password can be changed through the
application afterwards
You are successfully connected and you have protected your TESY
appliance.
