Водонагреватели Gorenje GBFU100B6 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
Dear buyer, we thank you for purchase of our product.
PRIOR TO INSTALLATION AND FIRST USE, PLEASE CAREFULLY READ THESE
INSTRUCTIONS
This water heater has been manufactured in compliance with the relevant standards
and tested by the relevant authorities as indicated by the Safety Certificate and the
Electromagnetic Compatibility Certificate. Its basic technical properties are stated upon the
nameplate, glued between the connection pipes. The water heater may be connected to
water and electric power supply only by a qualified specialist. The reach in its inside due to
the repair or removal of limestone and checking and replacement of anti-corrosion protection
anode may be performed only by an authorised service workshop.
BUILDING-IN
The water heater shall be built as close as possible to the outlets. It has to be fitted to the wall
using appropriate rag bolts with minimum diameter of 8 mm. The walls with great portability
must be at place where the water heater shall hanged up be suitably reinforced. Due the
universal construction the waterheater it can be fixed vertically on the wall or horizontally on
the wall (output pipes must be on the left).
TECHNICAL PROPERTIES OF THE APPLIANCE
Type
GB 50
GB 80
GB 100
GB 120
GB 150
Model
GBFU50/V6
GBFU80/V6
GBFU100/V6
GBFU120/V6
GBFU150/V6
Volume [l]
50
80
100
120
150
Rated pressure [MPa]
0,6
Weight / Filled with water [kg]
24/74
30/110
34/134
38/158
41/191
Anti-corrosion protection of tank
Enameled / Mg Anode
Power of electrical heater [ W ]
2000
Number and power of heating elements
[ W ]
2 x 1000
Connection voltage [V~]
230
Protection class
I
Degree of protection
IP 25
Heating time to 75°C
1)
[h]
1
55
3
05
3
55
4
35
5
45
Quantity of mixed water at
40°C [l]
96/80
151/130
199/174
238/210
296/260
Energy consumption
2)
[kWh/24h]
1,32/1,45
1,85/2,10
2,20/2,45
2,60/2,90
3,20/3,60
1) Time for heating of the whole volume of heater with electric immersion heater by entering temperature
of cold water from water supply 15°C.
2) Energy consumption to maintain stable temperature of water in the water heater 65°C at surrounding
temperature 20°C, measured according to SIST EN 60379.
GB
