Clage Mini MCX 6 1500-15006 - Инструкция по эксплуатации - Страница 34

34

EN

MCX 3..7  SMARTRONIC

®

18. Troubleshooting and Service

One LED flashes 
rapidly and water 
remains cold

Defective temperature sen-
sor 

Replace temperature sensor (authorized techni-
cian)

Defective heating element 

Replace heating element (authorized techni-
cian)

All LEDs flash rap-
idly and water gets 
warm

Defective  control panel 
cable

Reposition control panel connector (authorized 
technician)
Replace control panel (authorized technician)

All LEDs flash 
rapidly and water 
remains cold

Defective power unit 

Call customer service

LED turns off shortly 
after keypress

Keylock is active

Deactivate keylock (“How to use”, 32)

LED flashes after 
keypress

Touch key was not touched 
in centre

Don‘t touch the touch key for approx. 3 seconds 
(until LED lights up normally); for proper han-
dling, touch the touch key right in the centre

Touch key calibration active

No LED lights

LED Standby active

Check LED by touching the touchkey.  
If still no LED lights up, check the fuses!

If you cannot rectify the fault with the aid of this table, please contact customer service.

We can either give you the name and address of an authorised customer service company or 
repair the heater ourselves. In the latter case, please send in the heater (at your cost and risk) 
with details of the problem and a copy of the sales invoice.

CLAGE GmbH

After-Sales Service
Pirolweg 1 – 5 
21337 Lüneburg 
Germany
Phone:  +49 4131 8901-40 
Fax: 

+49 4131 8901-41 

Email:  service@clage.de

www.clage

-

com.ru