Винные шкафы Dunavox DX-70.258SS - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

76
USE AND CONTROL
(DAU-32.81B, DAU-
32.81SS,
DAU-32.81DB,
DAU-32.81DSS,
DX-51.15DBK/DP, DX-51.150DSK/DP) 
 
SINGLE ZONE
DUAL ZONE
POWER
To turn ON/OFF the appliance, press the
button
and hold 2 seconds.  
 
SETTING THE TEMPERATURE
 
Model:  DAU-32.81B, DAU-32.81SS  
– Single zone -
 
If  you  desire  to  change  the  temperature,  set  the 
temperature as you desire by touching the
or
button. The temperature that you desire to set
will increase 1ºC if you touch the
button once; on
the contrary the temperature will decrease 1ºC if you
touch the
button once.
 
Model: 
DAU-32.81DB,
DAU-32.81DSS,
DX-
51.150DSK/DP, DX-51.150DSK/DP
– Dual zone
 
The  temperature  range  of  lower  zone  is  +
12ºC to
+22
ºC which is suitable for storing white and red
wines. The temperature range of upper zone is +
5ºC
to +12
ºC which is suitable for storing sparkling and
white wines. 
 
If  you  desire  to  change  the  temperature,  set  the 
temperature as you desire by touching the
button. Temperature will increase or decrease by
1ºC when you touch the
button.
LOCK
 
When  the  appliance  is  power  on,  all  the  buttons  are 
on  unlock  position.  If  there
’s no any operation in 3
minutes, all the buttons will be in lock position. Press
button
for 2 seconds, all the button will be lock
or unlock. 
 
LIGHT
Press the button
to turn the light ON/OFF.
The  button  of  light  has  the  function  of  auto  off  or 
manual off.  
a.Holds the light button till you hear two beep sound, 
light will turn off after 10 minutes automatically. 
b.Holds the light button till you hear three  beep 
sound, light will be turn off manually.  
GENERAL INFORMATION
Operating Noises
The  unit  is  cooled  by  a  compressor  (refrigeration 
aggregate).  The  compressor  pumps  coolant  through 
the cooling system, producing operating noise. Even 
when  the  compressor  cuts  out,  noises  caused  by 
changes 
in
temperature
and
pressure
are
unavoidable.  Operating  noise  will  be  most  audible 
immediately  after  the  compressor  cuts  in.  It 
becomes quieter as the operating period continues. 
 
The following noises are normal and occur from time 
to time: 
-  Gurgling  sound,  caused  by  the  refrigerant  flowing 
through the appliance’s coils,
- Humming noise made by the motor compressor.
This  noise  can  get  louder  for  brief  periods  when 
the motor is switching on. 
- Cracking/popping sounds, resulting from the
materials  contraction  and  expansion  due  to 
temperature variations, 
- Fan operating sound, to circulate the air within the
wine cabinet.
 
Unusual  noise  is  normally  the  result  of  improper 
installation.  Under  no  circumstances  must  tubing 
come  into  contact  with  a  wall,  other  furniture  or  with 
other tubing. 
Where  the  unit  is  installed  in  open-plan  kitchen  or  in 
partition  walls,  the  level  of  operating  noise  will  be 
heard  more  acutely.  However,  this  is  due  to  the 
surrounding architecture and not to the unit. 
 
An individual’s perception of noise is directly linked 
to the environment in which the unit is located, as 
well the specific type of models. Our appliances are 
in line with international standards for such 
appliance and in line with the latest technical 
developments. But please remember that the noise 
of the compressor and the coolant circulating in the 
system is unavoidable. 
DEFROSTING / HYGROMETRY / 
VENTILATION 
 
Your  unit  is  designed  with  an  automatic  defrost 
system. During the 
“Off-cycle” the evaporator behind
the  rear  wall  of  the  unit  defrosts  automatically.  The 
condensate  collects  in  the  drain  trough  behind  the 
rear  wall  of  the  unit,  and  part  of  it  flows  through  the 
drainage  hole  into  the  drip  tray  by/above  the 
compressor.  The  heat  is  transferred  from  the 
discharge  pipe  or  compressor  and  evaporates  any 
condensation  that  has  collected  in  the  tray.  Part  of 
the  remaining  water  is  collected  within  the  unit  for 
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
 











