Beurer BF 700 - Инструкция по эксплуатации - Страница 16

16

  Degrees of activity

  Selection of the degree of activity must refer to the medium and long term.

Degree of activity Physical activity
1

None.

2

Low: A small amount of light physical effort (e.g. short walks, light garden work,

gymnastic exercises).

3

Medium: Physical effort for 30 minutes at least 2 to 4 times a week.

4

High: Physical effort for 30 minutes at least 4 to 6 times a week.

5

Very high: Intensive physical effort, intensive training or hard physical work for at 

least one hour daily.

– Assign the user when requested to do so by the app.

  For automatic personal recognition, the first measurement must be assigned to your personal user data. 

Follow the app instructions for this. Step onto the scale with bare feet and ensure that you are standing 

still with equal weight distribution and with both legs on the electrodes. 

8. Taking measurements 

Place the scale on a firm level floor; a firm floor covering is required for correct measurement. 
Weighing, carrying out diagnostics

Step onto the scale with bare feet and ensure that you are standing still with equal weight distribution and 

with both legs on the electrodes.

 Note:

 There must be no skin contact between your feet, legs, calves or thighs. Otherwise the meas-

urement cannot be performed correctly.

 Note:

 The measurement result will be incorrect if the measurement is carried out with socks on.

The scale begins to take measurements straight away. First, the weight is displayed. 

Whilst the other parameters are being measured, “

” appears.

The measurement is displayed shortly afterwards.

If a user has been assigned, the BMI, body fat, water, muscle, bone, BMR and AMR are shown. This is the 

case if the initials are shown.
The following appears:

1. Weight in kg with BMI

2. Body fat in % with interpretation of BF

3. Body water in % 

4. Muscle percentage in % 

5. Bone mass in kg 

6. Basal metabolic rate in kcal (BMR)

7. Active metabolic rate in kcal (AMR)
If the user is not recognised, only the weight can be shown and no initials appear “

  ”.

Only weight measurement 

Now step on the scale wearing shoes. Stand still on the scale with your weight distributed evenly between 

both legs. The scale immediately begins to measure your weight.

The weight is shown and “

  ” runs across the LCD.

If a user has been assigned then the BMI, BMR and AMR are displayed. This is the case if the initials are 

shown.

If the user is not recognised, only the weight can be shown and no initials appear “

  ”.

 Note:

 Only the measurements displayed on the scale may be used for further observations.

Switching off the scale

The scale will then switch itself off automatically.