Варочная панель Fulgor Milano FSH 804 ID TS MAT - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
28
GB
- Activate the cooking area by selecting the
cursor (16-17) then press the timer button
(5). In this way, you can set a countdown
to turn off the cooking area. Illuminated
clock icons (24) will light up next to the
cooking area display. To set To set the
timer on a cooking area when there is
more than one cooking area on, you
must:
- Other functions of the timer are are the
same as the independent timer. To
increase the time, use the plus button.
- The expiry of the time is signalled by a
beep and “00” on the display and the LED
of the cooking area assigned to the timer
flashes. The cooking area is turned off
and an “H” is shown if the area is “hot”,
otherwise the display shows a hyphen.
The beeping and flashing of the display
stop:
- Automatically after 2 minutes.
- When you press the clock button, the
timer display turns off.
increase (decrease) starts again from the
initial value.
- The timer can be set by either
continuously pressing the buttons (16-17)
or by pressing successively (with beeps).
After the timer is set, it begins to count
down. When the time runs out, the timer
display will flash and display “00”, beeping
for a maximum of 2 minutes.
The beep will not stop until a button is
pressed. The display stops flashing and
turns off.
Turning off/changing the timer
- The timer can be changed or turned off at
any time by turning on the touch display
again, if no cooking area is on, and
pressing the timer button (5) to select the
timer. At this point, set it to “0” by pressing
the minimum level in any of the cursors
(16) to turn it off, or by pressing the
maximum level (17) of any of the cursors
to increase the time setting.
- The independent timer remains active
even when the On/Off button is pressed
Programming the timer
for the cooking areas
By turning on the touch display, you can
program an independent timer for each
cooking area.
- At least one cooking area must be on and
set to a certain level.
- Activate the cooking area, select a cursor
(16-17) and then press the timer button
(5) to set a countdown time for turning off
the cooking area. The clock icons (24)
will light next to the display of the cooking
area. To set the timer of a cooking area
when there is more than one cooking
area on, you must:
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
