Fulgor Milano FCH 905 ID TS G DWK WH - Инструкция по эксплуатации - Страница 54

54

GB

Fig. 13

USER CHARACTERISTICS

GAS BURNERS

FEED

TYPE PRESSURE mbar

NORM.

BURNER

Ø INJECTORS

1/100

THERMAL 

CAPACITY

CONSUMPTION

Natural gas

G20

20

Wok Dual

A - Ø71

4000

381

B - Ø95

Liquefied 
gas

G30/G31

28-30/37

Wok Dual

A - Ø46

4000

291

B - Ø65

Electrical connection

Before connecting to the electricity supply, ensure that: 

-  the characteristics of the system are such as to satisfy that indicated on the registration plate applied to 

the bottom of the hob;

-  the system has an effective earth connection compliant with the standards and laws in force. Connection 

to earth is compulsory by law. 

If the appliance has no cable and/or plug, use material suitable for the absorption indicated on the 
registration plate and for the working temperature. The cable must not reach a temperature higher than 
50°C above room temperature in any point. 
For direct connection to the network it is necessary to fit an omnipolar switch of a suitable size to ensure 
disconnection of he network with a contact opening distance that allows complete disconnection in the 
conditions of the overtension category III, compliant with the installation regulations (the yellow/green 
earth wire must not be interrupted). 
The omnipolar socket or switch must be easy to reach when the appliance is installed. 
N.B.: 

- The manufacturer declines all responsibility if the usual accident prevention standards and the above 

instructions are not observed. 

If the power cable is damaged, it must be replaced by the manufacturer or by the manufacturer’s technical 
servicing network, or by a similarly qualified operator, to prevent every possible risk.