Fulgor Milano FCH 905 ID TS G DWK WH - Инструкция по эксплуатации - Страница 44

44

GB

Automatic heat-up function

When the automatic heat-up function is activated the wattage of the cooking zone is at 100% 
for a certain heat-up time which is dependent on the setting selected (continuous).
At the end of the heat-up time the electronic control switches back to the preselected 
simmering setting.

Starting process of the automatic heat-up

-  The control is ON and a cooking zone will be selected
-  When the power level 9 is reached the automatic heating is activated through a further 

press of the slider in correspondence with the maximum value.

-  The required power level is selected by means of the slider and the selected value is 

shown on the display.

-  At this point, you can select the level required for the continuation of the cooking using the 

Slider area. The symbol “A” appears 3 seconds after the button is released, alternating 
with the continuation level.

-  The continuation level can be changed within 15 seconds from activation without disabling 

the precooking boost. So, you must select the cooking area and then set the corresponding 
cooking area.

-  If the selection takes place after 15 seconds:
You can select a higher continuation level; this implies that the precooking time will 
automatically be aligned to the currently selected continuation level.

Cooking level

Precooking Boost A [min]

Maximum operating time [h]

0

0

0

u

0

6

1

1

6

2

3

6

3

4,8

5

4

6,5

5

5

8,5

4

6

2,5

1,5

7

3,5

1,5

8

4,5

1,5

9

0,2

1,5

Residual heat indicator

It is meant to indicate to the user that the glass ceramic has a dangerous touch temperature 
in the circumference of a cooking zone. The temperature will be determined following a 
mathematical model and the remaining residual heat will be indicated by means of “H” on 
the corresponding 7-segment display.
Heating up and cooling down will be calculated dependent on
•  The selected setting (“0” to “9”)