De Dietrich DPI7540B - Инструкция по эксплуатации - Страница 35

28

•

2

USE

Table locked in operation

The display of cooking zones in
operation alternately indicates power
and the locking symbol .
When you press the power or timer keys
for the zones which are «on»:
«bloc» appears for 2 seconds and then
switches off.

Unlocking

Press key 

juntil the "bloc" locking

symbol disappears from the display and
a beep confirms the operation.

CLEAN LOCK function

This function locks the hob off while it is
being cleaned.
To activate Clean lock: 
Give a short press on key 

(padlock).

A beep sounds and the "bloc" symbol
flashes in the display.
After a predefined time, the lock will
automatically disengage. Two beeps
Lock at any moment by pressing and

holding touchkey 

.

2.10 ICS FUNCTION
Intelligent Cooking System 

This function optimises the choice of
cooking zone for the diameter of
cookware used.
Proceed as follows:
Place the pan on the cooking zone, e.g.
28 cm dia.)
Select Boost power and possibly a
cooking time.

Press the 

key. The "ICS" symbol

appears in the display 

(2.10.1)

- either the zone chosen is the best one
for the pan and «ICS» disappears
leaving the initial cooking parameters in
the display.

b

b

b

j

- or the zone chosen is not the best one
for the pan and the display then
indicates which zone should be used
and the settings are transferred to it
automatically (

2.10.2

).

N.B.

: The hob must be cold to use this

function.

2.11  RECALL  FUNCTION

This function lets you display the last
«power and timer» settings for all the
burners which were switched off less
than 3 minutes previously.
To use this function, the hob must be
unlocked. Press the On/Off key and then

give a short press on key 

(2.11)

. 

When the hob is operating, the function
lets you see the power and timer settings
for the burner(s) which have been
switched off for less than 30 seconds.

2.12 SWITCH FUNCTION

This function allows a pan to be moved
from one zone to another while retaining
the original settings (power and time).

Give a short press on the

, 

key; ====

symbols scroll through the display. Select
the zone to which you wish to move the
pan. The settings will be transferred to
the selected zone and you can now move
the pan. 

2.13 BOIL FUNCTION

With this function you can boil and
simmer water to cook pasta, for
example.

Select a zone and give a short press on

the «Boil» 

(2.13.1) 

.

The default quantity of water displayed is
2 litres, but you can change it using the +

k

l

m