De Dietrich DPI7540B - Инструкция по эксплуатации - Страница 34

•

2

USE

27

key 

; a long beep sounds and the

displays go off or the "H" symbol
appears.
Pressing the touchkey in front of or
behind the zone deactivates the function
and transfers the settings to the selected
zone.

2.7    SETTING  THE  TIMER

Each cooking zone has a dedicated
timer. It can be used as soon as the
cooking zone is turned on.
To switch it on or change it, press the

timer touchkey 

(2.7.1)

, and then the

+

ou

-

touchkeys 

(2.7.2)

.

To make setting a very long time easier,
you can go straight to 99 minutes by
pressing the 

– 

touchkey.

At the end of cooking, the display
indicates 0 and a warning beep sounds.
To cancel this information, press any
button for the particular cooking zone
being used. Otherwise, they will switch
off after a few seconds.
To stop the timer during cooking, press
the 

+

and 

– 

keys at the same time or

return to 0 using the 

– 

key.

Independent timer

This function allows you to time an event,
without cooking.
- Select a cooking zone you are not using

(2.7.3).

- Press the 

.

- Set the time with touchpad 

. A “t”

flashes in the display (2.7.4).

- At the end of your adjustment “t” be-

comes becomes fixed and the count be-
gins.

Note:

d

h

g

h

g

You can stop a count in progress by
keeping your finger on the touchpad of
the selection on the display.

2.8 ELAPSED TIME key

This function displays the time since the
power setting was last changed for a
selected cooking zone.

To use this function, press the 

key.

The elapsed time flashes in the selected
zone's timer display 

(2.8.1)

.

If you want cooking to end within a

specific time, press the 

key and

then, within 5 seconds, press 

+

on the

timer to increase the desired cooking
time. The elapsed time is displayed fixed
for 3 seconds and then the remaining
time is displayed. A beep sounds to
confirm your choice.
This function is available with or without
the timer function.
Note: if the timer is showing a time, it is
not possible to change it within 5

seconds of pressing 

. After 5

seconds, the cooking time can be
changed.

2.9 LOCKING THE CONTROLS
Child safety lock

Your hob has a child safety device which
locks the controls when the hob is not in
use or during cooking (to maintain the
current settings). For safety reasons,
only the stop key and the zone selection
keys are still active and allow the hob or
a cooking zone to be switched off. 

Locking 

Press key 

until the "bloc" locking

symbol appears in one of the displays
and a beep confirms the operation

(2.9.1)

.

i

i

i

b