Barazza 1PIDG64B - Инструкция по эксплуатации - Страница 14

14

• Switching the cooking zones on

To switch on a cooking zone press the cor-

responding Cooking Zone key then adjust 

the heat setting using the [+] key and [-] 

Key within 10 seconds. The heat level of 

each single cooking zone can be set in 9 

different positions and  will be shown in the 

corresponding cooking zone display with a 

number ranging from «1» to «9». Press the 

[+] key to increase the heat level, press the 

[-] key to decrease it. 

• Switching the cooking zones off

To switch a cooking zone off select it and 

bring its heat level back to «0» by pressing 

the [-] key.

• Pot detection  «

0 4

»

Each induction cooking zone has a pot de-

tection minimum limit, which
varies according to the material of the co-

okware being used.
For this reason, you should choose the 

cooking zone which is most suitable for the 

diameter of the cookware you are going to 

use.

If the symbol «

0 4

» appears on the co

-

oking zone display, it means that:

• The cookware used is not suitable for 

induction cooking.
• The cookware diameter is smaller than the 

one allowed by the hob.
• No cookware is on the cooking zone.

For more details about this feature refer to 

chapter ‘‘Induction cooking”.

• Residual heat  «H»

If the temperature of the cooking zone is 

still high (over 50°) after it has been swi-

tched off, the relative display will indicate 

the symbol «H» (residual heat). 
The symbol will stay on even when the 

appliance is switched off and will only switch 

off when the burn risk in no longer present.
 

• Power Boost  «P»

The use of this function is recommended 

for heating large quantities of liquids (e.g. 

water to cook pasta) or food  in a very short 

time. 
This program further reduces the cooking 

time of a certain cooking zone, by bringing 

the temperature to the maximum heat level 

for 10 minutes. 
At the end of this timeframe, the cooking 

zone heat level will automatically go back to 

level «9». To activate this program, switch on 

the cooking zone B1 or B4  and press the [+] 

key until you reach level «9» then press the 

[+] key again. The «P» symbol will be shown 

on the cooking zone display to confirm the 

activation of the function. 

• Timer

This function allows you to set the time from 

«01» (1 minute) to «99» (99 minutes) for the 

automatic switch off of a cooking zone.
Select a cooking zone by pressing the cor-

responding Zone Selection key and adjust 

the heat level. Press simultaneously the [+] 

and [-] keys to activate the Timer display. 

Set the desired time within 10 seconds using 

the [+] and [-] keys. Wait 10 seconds for the 

automatic confirmation of the settings. The 

time countdown will be shown on the timer 

display. 

When time elapses the cooking zone will au-

tomatically switch off, the display will show 

a flashing «00» and an acoustic signal will be 

heard. Press any key on the control panel to 

stop the signals.
To disable the timer of a cooking zone press 

the corresponding Zone Selection key then 

press simoultaneously the [+] and [-] keys 

to turn on the Timer display. Bring the timer 

value back to «00» by using the [-] key. Wait 

10 seconds for the automatic confirmation.

The led (C*) on the display of the cooking 

zone stops flashing.

• Egg timer/reminder

When no cooking zone is active it is possi