Smeg SR804SEA4 - Инструкция по эксплуатации - Страница 23

Instructions for the user

49 

10.2

Cleaning of cooking hob components 

CAUTION: do not wash these components in a dishwasher. 

In normal use of the hob, the stainless steel burner caps and pan-

stands tend to be burnished by the high temperature.  Clean these parts 
using very fine abrasive sponges or similar commercial products. Then 

use a specific paste polish to restore the steel’s shine. Your local 
authorised after-sales technician is able to supply professional products 

for appliance cleaning and care. 

Grids, caps, flame cap crowns and burners can be 
removed for ease of cleaning. Wash them in warm 
water using a non-abrasive detergent, taking care to 
remove all tough spots. Before remounting, allow the 
components to fully dry out. In fact, humidity residues 
inside the burner holes might impair burner operation. 

10.2.1

Ignition plugs and safety devices 

For good functioning of the lighting ignition plugs and the safety 
devices, keep them very clean. 
Check frequently and clean with a damp cloth when necessary.

10.2.2

The electric element 

After use, to make sure that the surfaces are clean and long lasting, the 
electric element must be treated with specific cleaning products which 
are available on the market. This necessary operation prevents 
oxidisation (rust formation).

10.2.3

The cover 

Clean the glass or steel cover, where mounted, with warm water. Never 
use abrasive sponges or detergents.

Never lower the cover when burners or electric elements are on or 
still hot. 

Attention: the glass lid may break if overheated. Make sure that all the 

burners are switched off and let them cool down before lovering the lid.