Smeg SR804SEA4 - Инструкция по эксплуатации - Страница 19

Instructions for the user

45 

9

USING THE HOB 

Before turning on the burners, make sure that the burner rings, caps 

and grids have been fitted correctly. 
In the ultrarapid burner, notch 

A 

must be aligned with pin 

B

. 

Grid 

C 

provided is intended for use with woks (Chinese pans). 

Adapter 

D 

comes only with open grids models and is intended for use 

with small sized vessels.

9.1

Ignition of the burners 

The device is fit with electronic ignition. Simply press and 
simultaneously turn the knob counter-clockwise on the low point flame 
symbol, until the burner is ignited.

In models with safety valve, the knob 

has to be turned to the ignition symbol 

before it is pressed, and after 

ignition the knob has to be kept pressed for about 2 seconds to keep 
the flame lit and to activate the safety device. 
The burner might go off when the knob is released. In this case repeat 
the aforesaid operation keeping the knob pressed for more than 2 
seconds. 

Should the burners go off accidentally in the models with valves, a 

safety device will trip after approximately 20 seconds to block the gas 
outlet even if the cock is open.

9.2

Practical advice for using the burners 

For better burner performance and minimum gas 
consumption, flat bottomed, even pans must be used, 
with covers and proportional in size to the burners (see 
paragraph “9.3 Diameter of the pans”). 

To avoid overcooking or damage to the surface top