Simfer H45V35M555 - Инструкция по эксплуатации - Страница 29

29

TROUBLESHOOTING

You may solve the problems you may encounter with your product by 

checking the following points before calling the technical service. 

Check Points

In case you experience a problem about the cooker, first check the table 

below and try out the suggestions.

Problem

Possible cause

Remedy

No Ignition.

No sparks.

Check power supply.

Cooker cover is not fitted properly.

Fit the cover properly.

Gas supply is closed.

Fully open gas supply.

Not Proper Ignition.

Gas supply not fully open.

Fully open gas supply.

Cooker cover is not fitted properly.

Fit the cover properly.

Ignition plug is clogged with foreign 
materials.

Wipe off foreign materials with a cloth.

Hobs are wet.

Carefully dry the hobs.

Flame spreader holes are clogged.

Clean the flame spreader.

Noise coming when burning 
or during ignition.

Cooker cover is not fitted properly.

Fit the cover properly.

Flame turns off during 
operation.

Flame observer device is clogged by 
foreign material.

Clean flame observer device.

Overflow food turns off the flame.

Switch off the hob. Wait for one minute 
and ignite again. 

A strong air flow turns off the flame.

Please check related hob and check 
the cooking area for air flows, for 
example, from an open window. Wait 
for one minute and ignite again.

Yellow flame. 

Flame spreader holes are clogged.

Clean the flame spreader.

Different gas is being used.

Check the gas being used.

Unstable flame.

Cooker cover is not fitted properly.

Fit the cover properly.

Gas odour.

Hob spout left open.

Check if any hob spouts are left open.

Leakage from connection of gas cylinder 
to cooker.

Make sure connections are leak-proof.

Lighter not operating.

Tips or body of ignition plugs are 
clogged.

Clean tips or body of ignition plugs of 
gas burners.

Gas burner pipes are clogged.

Clean gas burner pipes.