Simfer H45V35M555 - Инструкция по эксплуатации - Страница 14

14

Gas Connection
WARNING:  

Before starting any work related with gas installation, turn off 

gas supply. Risk of explosion.

1. 

Connect your appliance to gas cock from the shortest way and in a 

manner to prevent any leakage. For safety, the hose used should be maximum 
125 cm and minimum 40 cm.

2. 

While making gas leakage control; never use lighter, match, glowing 

cigarette or similar inflammable matter.

3. 

Apply soap bubble on connection point. If any leak/leakage exists, 

foaming will occur on soaped region.

4.

 If the cooktop is to be mounted on a cabinet or openable drawer, a 

heat protection panel having 15 mm minimum opening should be mounted 
under the cooktop.

For LPG connection;

For LPG (cylinder) connection, affix metal 
clamp on the hose coming from LPG 
cylinder. Affix an edge of the hose on hose 
inlet connector behind the appliance by 
pushing to end through heating the hose 
in boiled water. Afterward, bring the clamp 
towards end section of the hose and tighten 
it with screwdriver. The gasket and hose inlet 
connector required for connection is as the 
picture shown below.

NOTE:

  The  regulator  to  be  affixed  on  LPG  cylinder  should  have  300 

mmSS feature.

Main gas pipe

Gasket
Hose inlet connector

Metal clamp

Lpg connection hose

GB