Monsher MHI 6006 - Инструкция по эксплуатации - Страница 62

English

62

Maintenance of the Hob

If you find something goes wrong for your hob, before contact the service or 

where you purchased it, please check whether below:

1. There is no power to the appliance:

;

 Check whether there is a power cut of your department;

;

 Check whether the appliance be connected to electricity properly;

;

 Has the timer setting elapsed;

;

 Whether it reaches the longest cooking time setting and auto shut off;

;

 Whether there is liquid boiling over touch control panel and overflow protection 

devices auto shut off;

2. The touch control panel buttons can’t be active:

;

 Whether it’s under “Child Lock”, which there is “Lo” shows in timer displayer;

;

 Whether liquid/wet cloth over touch control panel active overflow protection;

3. After cooking there is “H” shows on display:

;

 This is normal. The hob is with Residual Heat Warning safety features. It will 

remain on until the surface is cool enough for touch.

4. After turn off, the fan of induction hob remains working for a while:

;

This is normal, this is to help appliances completely cool down.

5. Some pans make crackling or clicking noises during use of induction hob:

;

This is normal, it’s the sound of induction coils during working, and for different 

construction of your cookware, the clicking might be slightly different.

6. The glass is being scratched: 

;

Check whether you use unsuitable cookware, like rough-edged cookware.

;

Check whether unsuitable, abrasive scourer or cleaning products being used.
Failure Inspection for induction hob             

If an abnormality comes up, the induction hob will enter the protective state 

automatically and display corresponding protective codes:

Problem

Possible causes

What to do

E1/E2

Abnormal supply voltage 

Please check whether power supply is 

normal, Power on after the power supply is 

normal.

E3

High temperature of the pan 

sensor

Check whether no liquid in pan, fill with 

liquid then restart.

E5

High temperature of the IGBT 

temperature sensor

Please restart after the induction hob cools 

down.

For all other error codes, switch off and call your service provider.