Kuppersberg ICS 612 - Инструкция по эксплуатации - Страница 33

33

ENGLISH

TECHNICAL PASSPORT

Built-In Induction Hob  

3. OPERATION INSTRUCTIONS
3.1. TURN ON

Press “ON/OFF” button to switch on or switch off the hob and you will 

hear a “beep” after touch. All display will show “-” or “- -” respectively. If 

without any operation after switch on the hob in 60 seconds, the hob will 

be turned off automatically.

Use e a suitable pot/pan on the heating area. 

Make sure the bottom of the pan/pot and the surface of the heating area 

are clean and dry

When  touch  the  heating  zone  selection  button,  display  nearby  will  flash 

«0».

The  display  will  stop  flashing  within  5  seconds  after  no  operation,  and 

show the power level.

Control the power by “+”/”-” or slider touch control.

When  the  heating  power  of  any  heating  zone  is  «0»,  the  cooker  will 

automatically enter the standby state after 1 minute of no operation.

You can change the power at any time during cooking.

Touch the selection button of the heating area that you want to close, and 

the digital display nearby will flash the current power level. 

Turn off the heating zone by sliding down to «0» or touch the «-» and «+» 

keys at the same time.

Press the “ON/OFF” button to switch on or switch off the cooker.

Take care of the residual heat of crystal plate.

«H»  means  which  heating  zone  is  hot.  When  the  surface  cools  to  a  safe 

temperature,it  will  disappear.  It  can  also  be  used  as  an  energy  saving 

function.  If  you  want  to  further  heat  the  pot,  use  the  heating  zone  with 

residual heat.

3.2. TURN OFF