Kuppersberg FS 601 C - Инструкция по эксплуатации - Страница 20

20

TECHNICAL PASSPORT

ENGLISH

Gas hob

C L E A N I N G A N D  M A I N T E N A N C E.  G E N E RA L  I N F O R M AT I O N

The best procedure we recommend 

is to clean the cooker regularly after 

each use. For this purpose, allow the 

cooker to cool down.

Never use a steam pressure cleaning 

apparatus for the cleaning procedures. 

The pressure steam may cause perma-

nent damage on the surface and struc-

tural components of the cooker. The 

manufacturing  firm  may  not  be  held 

responsible for such damages Do not 

use any pointed instruments during the 

cleaning procedure.

Never use the following materials as 

they may give damage to the surface of 

the cooker:

Sand, materials containing sodium 

hicarbonate/alkali, acid or chloride, grill 

and oven sprays, dishwasher detergent, 

stain and mst removers, powder deter-

gents, liquid cleaning materials contain-

ing particles, hard sponges/brushes.

The burner lid will become matt in 

the course of time. It is very normal and 

has nothing to do with the quality of the 

material.

Â

Wipe the parts of the burner ap-

paratus with a damp cloth and then 

wipe dry.

Â

Wipe the lighter electrode and 

thermocouple with a well-squeezed 

cloth carefully and wipe clean with a 

clean cloth.

The lighter apparatus on the burner 

apparatus should not get wet; other-

wise, the lighter fails.

You should wipe dry the cooker thor-

oughly after each wet cleaning. Thus 

you will have removed any lime that 

might have accumulated on the cooker.

Cooker Grates, Cooker Buttons

Â

Lift the grates.

Â

Clean the grates and buttons of 

the cooker with a sponge cloth and de-

tergent hot water. In case of excessive 

dirt, keep them in hot water for a while 

to soften them.

Â

And then wipe all parts with a 

clean cloth and wipe dry.

Burner

After the cooker cools down, you may

remove and clean the burner parts.

The Burner Parts Are Dismounted 

and Cleaned as follows:

Â

Remove all movable parts and 

wash with detergent hot water. And 

then wipe dry them. Meanwhile, make 

sure the flame holes are dry completely.