Kuppersberg FQ663 W - Инструкция по эксплуатации - Страница 9

9

English

TEchnical passporT

gas hob

levels, it should not be realized between 

maximum and off positions. To close the 

burner turn the switch clockwise till to 

reach “off”  position. 

MODELS EQUIPPED WITH 

LIGHTER SWITCH (Automatic 

ignition) 

In order to burn one of the burners, 

press the switch down and bring the 

switch to maximum position. When it 

burns,  fl ame  is  adjusted  to  the  desired 

intensity with the switch.

Figure 6.

RIGHT

WRONG

7.  M A I N T E N A N C E  A N D 

C L E A N I N G 

Please  comply  with  the  following 

rules before cleaning and maintenance. 

Â

Close the unit for safety purposes. 

If your device is set to natural gas 

setting close the valve. For LPG hobs 

close hood. 

Â

Take out the plug of your unit 

from wall socket. 

Â

If the hob is hot wait until it will 

be cooled. 

Â

In order that you use the glass 

hob and grills for longer periods you 

need to clean them with appropriate 

cleaning agents at certain intervals. 

Â

Cleaning on stainless surfaces 

should be conducted in accordance 

with the steel surfaces, and the surface 

should be dried preferably with a soft 

leather part. 

Â

In order to avoid any damage to 

the burning system do not use burning 

system when the burners are not 

installed. 

Â

After the thermo-coupled 

cleaning providing plug and safety 

system, clean it to place burners in 

suitable manner. 

Â

Wash the upper burning heads at 

certain intervals with water and clean 

and dry the gas channels with brush. 

Pay attention to install the burning 

heads on their places. 

Â

When you clean the burner do 

not use acid, thinner, benzene or similar 

chemical. 

Â

You need to clean your glass hob 

and its grills with suitable cleaning 

Â

In order that the hob will 

operate properly the grills and burner 

components should be properly 

positioned.(Figure 1) 

Â

Make sure that the fl ame of your 

burner is in blue color and work quietly. 

If the burner will burn in yellow color 

or work with voice make sure that all 

burners  fi t  properly.  If  the  fl ame  color 

does not change to blue color then 

apply the authorized service.