Kuppersberg FGC 63 W - Инструкция по эксплуатации - Страница 11

20

21

USER MANUAL

ENGLISH

ENGLISH

USER MANUAL

Table top cooker & built - in cooker

Table top cooker & built - in cooker

C L E A N I N G A N D  M A I N T E N A N C E. G E N E RA L  I N F O R M AT I O N

The best procedure we recommend is to 

clean the cooker regularly after each use. For 

this purpose, allow the cooker to cool down.

Never use a steam pressure cleaning 

apparatus for the cleaning procedures. The 

pressure steam may cause permanent damage 

on the surface and structural components of 

the  cooker. The  manufacturing  firm  may  not 

be held responsible for such damages

Do not use any pointed instruments 

during the cleaning procedure.

Never use the following materials as 

they may give damage to the surface of the 

cooker:

Sand, materials containing sodium 

hicarbonate/alkali, acid or chloride, grill and 

oven sprays, dishwasher detergent, stain 

and mst removers, powder detergents, liquid 

cleaning materials containing 

particles, hard sponges/brushes.

The burner lid will become matt in the 

course of time. It is very normal and has 

nothing to do with the quality of the material. 

Â

Wipe the parts of the burner apparatus 

with a damp cloth and then wipe dry. 

Â

Wipe the lighter electrode and 

thermocouple with a well-squeezed 

cloth carefully and wipe clean with a 

clean cloth.

The lighter apparatus on the burner 

apparatus should not get wet; otherwise, the 

lighter fails.

You should wipe dry the cooker 

thoroughly after each wet cleaning. Thus you 

will have removed any lime that might have 

accumulated on the cooker.

Cooker Grates, Cooker Buttons

Â

Lift the grates.

Â

Clean the grates and buttons of the 

cooker with a sponge cloth and detergent 

hot water. In case of excessive dirt, keep 

them in hot water for a while to soften 

them.

Â

And then wipe all parts with a clean 

cloth and wipe dry.

Burner

After the cooker cools down, you may 

remove and clean the burner parts.

The Burner Parts Are Dismounted and 

Cleaned as follows:

Â

Remove all movable parts and wash with 

detergent hot water. And then wipe dry 

them.  Meanwhile,  make  sure  the  flame 

holes are dry completely.

T E C H N I CA L  I N F O R M AT I O N.  G A S  CO N N E CT I O N

Gas connection or conversion to any other 

type of gas may be performed only an expert 

and  qualified  person.  Such  qualified  person 

is responsible for performing this procedure 

excellently.

When the gas collection is performed, 

be careftd that the gas-cutting cock is at an 

easily accessible place.

Ask the gas distribution authority ahout 

type of the gas supplied to your cooker, and 

compare the information with the gas data 

written on the nameplate of the equipment.

The equipment is suitable for natural gas 

and liquefied petroleum gas.

This equipment is designed for natural 

gas and liquefied petroleum gas  depending 

on the system used.

To convert it to any other type of gas, the 

cooker nozzle suitable for the system used 

in the respective country comes with the 

equipment.

Conversion to other type of gas is 

described in the installation instructions in 

detail.

Installation of Your Equipment. Liquefied petroleum gas  Connection

Make sure the gas hose and gas pressure-

reducing valve you will use for the cooker 

should  be  stamped  as  TSE-certificated. 

Attach the gas supply hose to the hose 

nozzle behind the cooker and tighten it by 

use of sheet clamp and screwdriver, “Figure 

6”,  and  make  sure  it  is  firmly  tightened.  Gas 

hose of the cooker should not be longer than 

1250mm.

Pressure of the pressure-reducing valve 

to be used should be 300mmSS 1.5kg/h and 

TSE-certificated. Do not allow intervention by 

any person. Before operating it, make use the 

system does not leak gas.

Figure 6 

Sealing Control:

Open the pressure-reducing valve or 

natural gas valve and apply soap solution 

on the point of connection to check for gas 

leakage. 

Never conduct this test by flame.