Kuppersberg FBG 36 X - Инструкция по эксплуатации - Страница 8

8

TECHNICAL PASSPORT

ENGLISH

Gas hob

Â

The  appliance  is  fitted  with  a 

flame  failure  safety  device  on  each 

burner, which is designed to stop the 

flow  of  gas  to  the  burner  head  in  the 
event of the flame going out.

To ignite a burner:

Â

  Press in the control knob of 

the burner that you wish to light and 

turn  it  anti-clockwise  to  the  maximum 

position.

Â

  If you keep the control knob 

depressed,  the  automatic  ignition  for 

the burner will operate.

Â

 You should hold down the 

control knob for 15 seconds after the 

flame on the burner has lit. If after 15s 

the burner has not lit, stop operating 

the  device  and  open  the  compartment 
door  and/or  wait  at  least  1  min  before 
attempting  a  further  ignition  of  the 

burner.

Â

  After this 15-second interval, to 

regulate the flame you should continue 

turning the control knob anti-clockwise 

until  the  flame  is  at  a  suitable  level. 

The operating position MUST be at a 

position  between  the  maximum  and 
minimum position.

Â

  To switch the burner off, turn 

the control knob fully clockwise to the 
gas off position.

Â

  In case of power failure, the 

burners can be lit by carefully using a 

match.