Kuppersberg FBG 36 X - Инструкция по эксплуатации - Страница 12

12

TECHNICAL PASSPORT

ENGLISH

Gas hob

U S I N G  I N S T R U CT I O N S

Warning

Â

  Не  вносите  никаких  измене

-

ний  Do not modify this appliance.

Â

  This  appliance  must  be 

installed by an authorised technician or 
installer.

Â

 Prior to installation, ensure 

that the local distribution conditions 

(nature  of  the  gas  and  gas  pressure) 
and the adjustment of the appliance are 
compatible.

Â

  The  adjustment  conditions  for 

this appliance are stated on the label 

(or data plate).

Â

  This appliance is not connected 

to  a  combustion  products  evacuation 

device. It should be installed and 
connected in accordance with current 
installation regulations. Particular 
attention should be given to the relevant 

requirements regarding ventilaton.

Â

 Before installing, turn off 

the gas and electricity supply to the 
appliance.

Â

  All appliances containing any 

electrical components must be earthed.

Â

  Ensure that the gas pipe and 

electrical cable are installed in such a 
way that they do not touch any parts of 

the appliance which may become hot.

Â

Gas pipe or connector 

shouldn’t be bent or blocked by any 
other appliances.

Â

  Check  the  dimensions  of  the 

appliance  as  well  as  the  dimensions  of 

the gap to be cut in the kitchen unit.

Â

 The panels located above 

the work surface, directly next to the 

appliance,  must  be  made  of  non-
flammable  material.  Both  the  stratified 

surfacing and the glue used to secure 
it should be heat resistant, to prevent 
deterioration.

Â

  Turn on appliance tap and light 

each burners. Check for a clear blue 

flame without yellow tipping. If burners 
shows  any  abnormalities  check  the 

following :

– Burner lid on correctly

–  Flame  spreader  positioned 

correctly

– Burner vertically aligned with 

injector nipple

Â

 A full operational test and 

a  test  for  possible  leakages  must  be 

carried

Â

out by the fitter after installation.

Â

  The flexible hose shall be fitted 

in  such  a  way  that  it  cannot  come  into 
contact  with  a  moveable  part  of  the 

housing unit and does not pass through 

any  space  susceptible  of  becoming 

congested.

Â

  Grease cranes produced at the 

factory  to  meet  the  requirement  of  all 

life hob.