Kuppersberg ESO 622 F - Инструкция по эксплуатации - Страница 45

45

ENGLISH

TECHNICAL PASSPORT

Electric hobs

DISCONNECTING THE AUTOMATIC 

COOK START FUNCTION 

After at least 10 seconds have passed 

since the automatic cook start function 

was activated: 1 Press the touch button 

 (4) "or set the power level 0. The 

automatic cook start function will be 

deactivated. 

T I M E R  F U N CT I O N 

Â

This function makes the cooking 

process easier because you do not 

have to be present: the timed hot 

plate(s) will switch off automatically 

after the set time has lapsed. There 

is a separate timer for each hot plate, 

which allows all of the hot plates to be 

timed simultaneously. The function is 

controlled using the increase/decrease 

time touch buttons   /   (6/7). 

Timing ONE hot plate. 

Â

To activate the timer for one hot 

plate: 

1.  Connect the appliance and 

activate one or several hot plates at a 

set power level. 

2.  Use the touch buttons (6/7) to 

select a cooking time between 1 and 99 

minutes. 

The timer will be set for the hot 

plate. Once the countdown is complete, 

the timed hot plate will switch off and 

you will hear a series of beeps, which 

you can stop by pressing any of the 

touch buttons. 

Setting the timer for more than 

one hot plate. 

Repeat the steps above. 

Changing the programmed time. 

You can change the time afterwards. 

1.  Use the touch buttons   /   ( (6/7) 

to select a cooking time between 1 and 

99 minutes. 

Now you can read and change the 

value. If you want to cancel the timer 

early, use the touch button   /   (7 or 

6) to set it to 00 or press both buttons 

at the same time. 

Locking the hot plate touch 

buttons 

You can use the lock button 

 (2) 

to lock all of the buttons on the touch 

control panel. This prevents functions 

from being activated accidentally and 

children from playing with the controls. 

To activate or deactivate the 

function, keep the touch button 

(2) pressed down for around 1 second. 

When the function is activated, the pilot 

light (11) lights up.