Kuppersberg ESO 622 F - Инструкция по эксплуатации - Страница 39

39

ENGLISH

TECHNICAL PASSPORT

Electric hobs

Switching the automatic cook start 

function on

1. The hotplate must be selected.

2. Select Power Function (P) and 

then press power touch button    (5).

After using the touch key you must 

lower the continuous cooking power 

to the desired level, (for example 6). 

When the automatic cook function 

starts  «A»  indication  flashes  with 

desired power level on the display.

Switching the automatic cook start 

function off

After at least 10 seconds have 

elapsed since the beginning of the 

automatic cook start function:

1. The hot plate must be selected.

2. Press  touch button   (5) till 

the indicator reaches level P and the 

automatic cook start function will be 

deactivated.

T I M E R

Â

This function makes it easier to 

cook, as you do not need to be present 

throughout the process: the timed hot 

plate(s) will switch off automatically 

after the set time has lapsed. There is a 

separate timer for each hot plate, which 

allows all of the hot plates to be timed 

simultaneously.

Â

In these models you can use the 

clock as a timer for the hotplates, setting 

the time between 1 and 99 minutes. 

All cooking zones can be programmed 

individually and in a simultaneous 

manner.

Time setting for one hotplate

1. The cooking zone to be timе must 

be selected.

2. Select a power level for the 

hotplate from 1 to 9 using the touch 
keys (from 1 to 9) using the touch 
button   or   (5/4)

3. Press  clock  touch  key   (10). 

Timer indicator (12) will display 00. 
Depending on the model, the timed 

cooking surface indicator (13) will flash.

When setting the time, the symbol 

lashes   will on the power indicator 
(3).

4. Immediately afterwards, enter 

a cooking time between 1 and 99 
minutes, by using the touch keys   or 

 (5/4).

When the power indicator (3) 

stops  flashing,  it  will  start  to  count 

down the time automatically. The 
respective timed hotplate disolay (11) 

will  continue  flashing.  Or,  when  the 

countdown starts, the relevant power 
level and  

  will  flash  alternately  on 

the power indicator (3) of the relevant 
heater area. When the clock reaches 
01, it will switch from counting down 
minutes to seconds.

Once the selected cooking time has 

elapsed, the heating zone being timed 
is turned off and the clock emits a 
series of beeps for several seconds. The 

timer  indicator  will  display  a  flashing 

00 beside the hotplate that has been 
disconnected.

If you wish to time another hotplate 

at the same time, repeat steps 3 and 4.