BRAYER BR2303 - Инструкция по эксплуатации - Страница 6

6

EN

THE UNIT IS INTENDED FOR HOUSEHOLD USE 

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL 

OR LABORATORY PURPOSES. 

BEFORE THE FIRST USE

After unit transportation or storage at negative 

temperature, unpack it and wait for 3 hours before 

using.

•  Unpack the unit and remove all the packaging 

materials. 

•  Keep the original package.

•  Read the safety measures and operating 

recommendations.

•  Check the delivery set.

•  Examine the unit for damages, in case of damage do 

not plug it into the mains.

• 

Make sure that specified specifications of power 

supply voltage of the unit correspond to the 

specifications of your mains. 

•  Take the handle (4), lift the lock (2) and open the 

waffle maker.

•  Simultaneously press the locks (5) and remove the 

lower frying plate, then remove the upper flying plate 

in the similar manner by pressing the locks (6).

•  Wash all the frying plates (7) with warm water and 

neutral detergent, rinse them and wipe dry.

•  Install the required frying plates (7), to do this insert 

the bottom part of the plate first and then press on 

the upper part of the plate until the lock (2) clicking. 

Make sure that the frying plates (7) are fixed properly.

• 

Before the first use smear some vegetable oil over 

the frying plates (7).

• 

Close the waffle maker and insert the power cord 

plug into the mains socket, the indicators (1) «pover» 

will light up.

•  When the indicator (3) «ready» lights up, unplug the 

waffle maker and wait until it cools down completely.

•  Take the handle (4), press the lock (2) button and 

open the waffle maker. Remove the remaining oil 

from the frying plates (7) with a paper towel or a 

clean cloth.

Notes:

 -

 when you switch the unit on for the first time, 

some smoke or foreign odor may appear. It is 

normal and not covered by warranty.

 -

the foreign odor can change the taste of the first 

waffles that you made, so it is not recommended 

to eat them.

MAKING WAFFLES

•  Make the batter.

•  Install the

waffle maker correctly.

• 

Install the frying plates for making waffles (7).

•  Insert the power cord plug into the mains socket, the 

indicators (1) will light up.