Beurer LB 55 - Инструкция по эксплуатации - Страница 20

20

After cleaning and descaling
Insert the pad

• Put the cleaned pad or replacement pad [4] into the hotwater chamber.

Assemble the appliance

• Put the steam tower [3] back into the air humidifier. Press the steam nozzle [1] into the opening at the top 

of the steam tower [3].

• Screw the tank catch [9] onto the water tank [8]. Place the water tank [8] in the air humidifier.

• Place the cover [2] on top of the air humidifier.

9. In the event of problems

Problem

Cause

Remedy

No steam exiting

Appliance not connected to power.

Insert the plug [11] into the mains 

and switch on the appliance.

Water tank [8] empty.

Replenish water.

Water tank [8] not fitted correctly.

Fit tank [8] properly.

Appliance leaking

Water tank [8] leaking.

Replace tank [8].

Water tank [8] not shut properly.

Fasten the catch [9] properly.

Steam tower [3] not installed or not

installed correctly.

Install steam tower [3] properly.

Delay in steam output Very cold water in tank.

Use warmer water.

Appliance heavily scaled.

Descale the appliance.

Red indicator [A] illu-

minated

Water tank [8] empty.

Replenish water.

Valve on tank catch [9] is covered with dirt. Clean the valve.
Appliance heavily scaled.

Descale the appliance.

Water tank [8] not shut properly.

Close the catch [9] properly.

Water tank [8] not fitted correctly.

Fit tank [8] properly.

If the problem persists, please contact customer service.

10. Technical details

Rated output

365W

Nominal voltage

230V / 50Hz

Water tank volume

approx. 6 litres

Evaporation rate

Level I: approx. 200 ml/h

Level II: approx. 400 ml/h

Overheating protection

Through thermostat

Safeguard against 

running dry

If there is not enough water in the heater unit, the appliance switches off auto-

matically. The appliance has a sensor which detects the water level.

Switching

2-stage

Weight

approx. 3.0 kg

Dimensions (W / H / D)

310 / 230 / 350 mm

Connection

Fixed cable, approx. 1.4 m in length