Timberk THU UL 28 E - Инструкция по эксплуатации - Страница 6

www.timberk.com • electric humidifier

6

Comfortable conditions are achieved with a relative humidity of 40 to 

60%. You can determine the favorable humidity level for you by your own 

sensations, or you can use a special hygrometer (not supplied) for this 

purpose, which measures the relative humidity level.

Air ionization function

To activate or deactivate the air ionization function, press the ION button. 

When the button is pressed, the negative ion generator turns on / off, the 

ionization indicator on the control panel lights up / goes out.
The ionizer generates negatively charged ions (anions) and refreshes the 

air in the room. Anions strengthen the nervous and circulatory system, 

improve lung function and serve as effective protection against respiratory 

diseases (such as asthma and pneumonia). Anions clean the air of dust 

and smoke.

Humidity control function

When this function is activated, the device will automatically turn off when 

the set humidity level is reached and automatically turn on when the 

humidity level falls below the set humidity level.
To activate the humidity control function, press the «HUMIDITY» button. The 

display shows the set humidity value. Continue to press the «HUMIDITY» 

button to set the desired humidity level from 45% to 90%, in 5% increments 

and select the desired humidity level. After setting, the set value flashes in 

the display for 3 seconds, after which the value of the current humidity is 

displayed. Select 90% and press the HUMIDITY button again to disable 

this function.

Timer to turn off the device

To set the timer time to turn off the device, press the «TIMER» button 

several times, and the set timer time until the device is switched off will 

be reflected on the display from 1 to 12 hours, in steps of 1 hour. Within 

3 seconds after setting, the set value will be memorized and will not be 

displayed on the display. The device will switch off after the set time interval 

has elapsed.

IMPORTANT! 

If the device generates a large amount of condensate 

on the top of the device and on objects near it, it is 

necessary to reduce the intensity of the steam output.

Turning off the instrument or setting the timer value [0] will cancel the timer 

to turn off the device.

Automatic shut-off in the absence of water

If the water level in the tank drops below the minimum permissible 

level, the ultrasonic membrane of the device will automatically shut off, 

an audible signal will sound and the display will turn on and the water 

absence indicator «   « will flash. To continue the operation of the device it 

is necessary to fill the reservoir with water according to item 6 «Filling the 

reservoir with water», then connect the device to the electrical network.

Remote control (remote control)

With the remote control it is possible to control all functions of the device in 

an effective range of 6 meters. The description of the buttons is shown in 

figure 3. The remote control can be placed on the right side of the side in 

the upper part of the device housing with the help of an integrated magnet.

Sound notification

When the appliance is switched on and off, and when the buttons are 

pressed, a beep is emitted.

Switching off the device

To turn off the device, press and hold the «ON / OFF» button for 3 seconds 

and unplug the appliance from the mains.

7. FILTER-CARTRIDGE FOR WATER SOFTENING

The kit includes 1 filter cartridge installed on the cover of the water tank with 

a valve, with balls of mineral stone, which has strong absorbent properties. 

The filter absorbs elements of heavy metals such as lead, chrome, mercury, 

zinc, etc. Disinfects water and restores normal acidity (PH).

The service life of the filter is 4-6 months, depending on the quality of the 

water used and the frequency of use of the device.

If a white coating appears on the objects around the humidifier when using 

the humidifier, this may be due to the following reasons:

1. The water that is used contains a large amount of magnesium or calcium. 

Use water that has been previously cleaned with a household water filter.

2. Remains of calcium and magnesium salts accumulated in the inside of 

the device. It is necessary to clean the inside of the device.

3. Steam deposits on the surface of suspended dust in the air.

4. The properties of the water softening filter have deteriorated. It is 

necessary to replace the filter to soften the water.