Timberk THU UL 28 E - Инструкция по эксплуатации - Страница 5

www.timberk.com • electric humidifier

5

5. SCOPE OF DELIVERY

1. Air humidifier – 1 pc.
2. Instruction and warranty card - 1 pc.
3. Package – 1 pc.
4. Remote control – 1 pc.
5. Filter – 1 pc.

Fig. 2

Fig. 3

1. Power on / off button
2. On / Off button for air ionization function
3. Button for setting the timer to turn off the device
4. The button for setting the required humidity level from 45 to 90%.
5. Display

1

3

4

5

2

88

HUMID
%RM

Remote control

1. Power on / off button
2, 5. The button for setting the required humidity level from 45 to 90%.
3, 4. The steam output intensity selection button: low, medium, high
6. Set timer button to turn off the device
7. Button for activating the humidity control function
8. Ionization function ON / OFF button

1
3

2

4

5

7

6

8

6.APPLIANCE OPERATION

Switching the device on

Place the case on the stand, fill the tank with water and install the device 

strictly vertically on a flat dry surface, then connect the device to the mains 

by inserting the plug of the power cord into the outlet, while the illumination 

of the power button flashes on the control panel for 5 minutes.
Press the «ON / OFF» button, the device will automatically start to work, 

the button illumination will light and the display of the steam output and the 

current humidity value will appear on the display.
At the very beginning of the work, the level of spraying can be unstable, 

due to the difference in temperature and water quality. It will take some time 

for the water to vaporize on the ultrasonic membrane, and this process 

has stabilized. After 10-25 minutes of operation, the spray level gradually 

stabilizes.

Steam output intensity adjustment

To change the intensity of the steam output, press the «ON / OFF» button 

several times, the intensity of the steam output will vary: low, medium, high, 

and accordingly the intensity of the steam output will be displayed by the 

indicators on the display.