Timberk THU UL 16 E/M - Инструкция по эксплуатации - Страница 6

Увлажнители Timberk THU UL 16 E/M - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 24
Загружаем инструкцию
background image

www.timberk.com • electric humidifier

6

Always unplug the unit before removing the water tank. Do not touch the 

water in the base during operation!
Caution-risk of electric shock and damage of the product!

8. CLEANING AND MAINTENANCE

Comfortable conditions are reached at 40 to 60% relative air humidity. You can 

determine the humidity level favorable for you either according to your feelings 

or by using a special device called a hygrometer (not included in the scope of 

supply), measuring the relative humidity level.

Automatic switching off when there is no water

When water level in the tank drops below the minimum allowed one, the 

appliance’s ultrasonic membrane will automatically switch off and a red indicator 

will light up on the control panel. To continue operation of the appliance it is 

necessary to fill the tank with water according to item 6 «Filling of tank with 

water», and then connect the appliance to the electric mains.

Switching off

To switch the appliance off, turn the on/off and steam outflow intensity knob all 

the way to the left and disconnect the appliance from the electric mains.

Operation of THU UL 16E model

Switching on

Install the appliance to a true vertical on an even and dry surface, then 

connect it to the power line, having filled the tank with water first. Press 

button «     » on the control panel, the appliance will automatically start 

operating, and the operation mode indicator, steam outflow indicators and 

the current temperature value will light up on the display.
At the very beginning of operation, the atomizing level may appear 

unstable, which is caused by the temperature difference and water quality. 

It will take some time for water to transform into steam in the ultrasonic 

membrane and for this process to stabilize. In 10-25 minutes of operation, 

the atomizing level will gradually stabilize.

Adjusting steam outflow intensity

To select the operation mode and adjust the steam outflow intensity, press 

button «     » on the control panel several times, the steam outflow intensity 

will be changing: low, moderate, high, and the steam outflow intensity will 

be shown by the operation mode indicator on the display: 0,1,2,3.
Comfortable conditions are reached at 40 to 60% relative air humidity. You 

ATTENTION!

If a large amount of condensate is generated on the upper 

part of the appliance when it is operating, then you need to 

decrease the steam outflow intensity by turning the on/off 

and steam outflow intensity knob counterclockwise.

Switch off timer

To set the switch off timer, press button «     » on the control panel several 

times, upon that the set time value of the timer until switching off will be 

shown on the display (from 1 to 12).

SLEEP mode

The display brightness is automatically reduced in this mode.
To activate the SLEEP mode, press button «     » on the control panel, upon 

that the SLEEP mode indicator will be shown on the display. To deactivate 

this mode, press button «     » on the control panel again, upon that the 

SLEEP mode indicator on the display will go off.

Automatic switching off when there is no water

When water level in the tank drops below the minimum allowed one, the 

appliance’s ultrasonic membrane will automatically switch off and the no water 

indicator «     » will light up on the control panel. To continue operation of the 

appliance it is necessary to fill the tank with water according to item 6 «Filling of 

tank with water», and then connect the appliance to the electric mains.

Switching off

To switch the appliance off, press button «     » on the control panel and 

disconnect the appliance from the electric mains.

ATTENTION! 

If a large amount of condensate is generated on the 

upper part of the appliance and around it when it is 

operating, then you need to decrease the steam outflow 

intensity by pressing button «     » on the control panel 

and by selecting a less powerful operation mode.

can determine the humidity level favorable for you either according to your 

feelings or by using a special device called a hygrometer (not included in 

the scope of supply), measuring the relative humidity level.

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Timberk THU UL 16 E/M?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"