Timberk THU UL 16 E/M - Инструкция по эксплуатации - Страница 5

www.timberk.com • electric humidifier

5

1. Air humidifier – 1 

2. Instruction manual and warranty card - 1

3. Package - 1

1. Remove the water tank from the base and unscrew the water tank cover.
2. Make sure no foreign objects are in the water tank.
3. Fill the tank with clean, cold water. Close the cover of the water tank 

securely, place the water tank onto the base. The water will running from 

the tank into the base.
4. Don’t pour water into the mist outlet of the appliance.

5. LIST OF PARTS

6. FILLING OF TANK WITH WATER

IMPORTANT! 

To avoid electric shock, prior to disassembling the 

unit (removing the tank), disconnect the unit from the 

power line! Do not fill the tank with other liquids but 

tap water. Different composition of liquids has harmful 

effect on internal parts and causes failures. Do not 

fill the unit or the water tank with such additives as 

essential oils, fragrances, cleaning agents, chemical 

medical drugs, warm water (above 40°), etc. 

Otherwise, the water tank and internal parts of the 

unit will be damaged and inoperable.
Do not fill water directly into the internal part of the 

unit or the atomizer. Water inside the unit may cause 

failure of the unit. Do not hit or throw the water tank. 

It may get damaged resulting in water leaks. Do not 

use the unit in case if the water tank is heavily hit. 

Immediately contact the technical support service or 

the maintenance and repair station. Every day fill the 

tank with fresh water and keep the unit clean.

1

3

2

4

5

6

7

8

9

10

Control panel for THU UL 16E (W)/(BL)

1. On/Off button

2. Power indicator

3. Current temperature value (TEMP)

4. Switch off timer setting button

5. SLEEP mode indicator

6. No water indicator

7. SLEEP mode activation button

8. Steam outflow indicators

9. Steam outflow intensity selection button

10. Appliance operation mode indicator

7. APPLIANCE OPERATION

Operation of THU UL 16M model

Switching on

Install the appliance to a true vertical on an even and dry surface, then 

connect it to the power line, having filled the tank with water first. Turn 

the on/off and steam outflow intensity knob all the way to the right. The 

appliance will switch on, the blue operation indicator will light up on the 

control panel and steam will start coming from the atomizer. At the very 

beginning of operation, the atomizing level may appear unstable, which is 

caused by the temperature difference and water quality. It will take short 

time for this process to stabilize.

Adjusting steam outflow intensity

You can adjust steam intensity by turning the on/off and steam outflow intensity 

knob to the left or right.

5. Insert the plug into the socket and switch on the appliance using 

the button. The red empty indicator light may stay illuminated for some 

seconds until the base is filled with water. Then the blue light comes on.