Увлажнители Timberk TAW H1 D - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
Poor atomizing
(insufficient
performance)
Remedy
Defect
Possible cause
The unit is operating in
a light mode (low
atomizing frequency)
No defect. If necessary to switch to the intensive
mode, press Atomizing frequency button in
the manual setting mode and switch the unit
to the intensive operation mode.
Tank water temperature
is too low
Set the maximum performance. Humidifier s
performance will be increased in 10 minutes
No atomizing
The plug is poorly
inserted into an outlet
Connect the plug into an outlet carefully
Light on the water
indicator has illuminated
and went out (water
tank is completely empty)
Add water to the tank
Difference between the
level of current humidity
and readings of a
humidity recorder
is too big
Dirt accumulation
inside an air vent
Clean the air vent. Even in one room humidity
can be different depending on the location
The unit is operated in
places, where it is affected
by the environment,
for example, by a window
Install the unit in places, where it cannot be
affected by the environment
Steam has an
unpleasant odor
Not fresh water in use
There are remains of
not fresh water or litter
in the water groove
Clean the unit in accordance with the cleaning
and maintenance manual and fill it with fresh
water
Table
5
.
www.timberk.com electric air washer (purifier)
