Timberk TAW H1 D - Инструкция по эксплуатации - Страница 3

3

ENGLISH

www.timberk.com 

electric air washer (purifier)

Take out the plug from an outlet in the following cases: prior to draining or filling 

the tank with water; prior to cleaning and maintenance; prior to 

mantling/dismantling of device elements; prior to transportation of thedevice to 

another place.

Install the humidifier on to a smooth dry surface. The outgoing steam may damage 

surfaces it contacts. Do not install the humidifier on the floor, as well as in the 

vicinity of heating appliances, furniture and other objects.

The manufacturer and the seller do not bear any responsibility for damages, 

inflicted due to improper position of the device.

To prevent damage of the device, do not add essential oils, preservatives, flavors 

and other foreign substances to humidification water. The manufacturer and the 

seller do not bear any responsibility for damages of the device, inflicted due to 

failure to follow this requirement.

Do not pull the power cord and do not touch it by wet hands when you unplug the 

device from electric mains.

3

. Technical characteristics

4. Description of the unit

Rated current, A

Power consumption, W

Power supply, V/Hz

Water protection

Water tank, L

Capacity of humidity, ml/h

Table

 1.

Electrical protection class
Device dimension, mm

Net weight, kg

1 - Air inlet grille.

2 - Pallet for of water.

3 - Air release panel.

4 - Control Panel.

5 - Cover the tank.

6 - Color LED humidity levels.

7 - Display Area, which reflects the current level of humidity (humidistat).

8 - Power cable with plug.

Fig

. 1

Air washer TAW H1 D moisturizes and cleanses the air without the use of 

replacement filters.

220/5

0

32-380

IPX0

1,5

4,0

500

365

x

200

x

395

II

5,86

50,0

2

Application area, m

1

2

3

4

5

6

7

8

The principle of operation of the device.

Dry contaminated air is drawn into the fan unit. Passing through the 

humidifying roller, which rotates with the engine and continuously 

wetted with water, the air is moistened, and particles of dust and dirt 

remain in the pan.

Thanks to a special coating on the rotating shaft (material: fiber-cloth 

"Super Fibra", - does not require replacement) air passing through the 

device quickly becomes saturated with moisture, and dust and dirt 

easily retained on the surface of the roller, in consequence of falling into 

the pan with water.

The treated air exits clean and moist - both in the nature of air is washed 

by rain water.

Water is constantly being updated, acting out of the tank.

Performance device for moistening and cleaning is regulated by various 

modes of operation.

Built-in humidistat constantly measures the level of relative humidity, 

current figures reflected in the display area. Low, medium and high 

levels of humidity indicator displays a color: white, blue and green, 

respectively.

Humidification based on the principle of automatic self-regulation (cold 

and heat of evaporation). Therefore, cleaning the air Timberk creates 

optimum humidity without additional devices.

The manufacturer reserves the right to change the set-list of the device (including liquid and powder 

components) for different supplies without prior notice. The changes either in no way influence the 

basic technical parameters of the device or may improve them, and also not violate the legislation or 

quality standards of the countries of manufacture, transit and selling.
The changes in the set-list may result in changing of the weight and dimensions of the device, but not 

more than by +\- 5-20% (depending on the product category)