Ardesto IR-B2235 - Инструкция по эксплуатации - Страница 20

21

EN

•  When self-cleaning is completed, plug into the power supply again, 

switch the steam regulator (C) to the 

«OFF»

 position and dry heating the 

iron until the indicator light turn off. Turn the temperature control dial (H) 

to minimum position. Disconnect the iron from the electric outlet. Turn 

the iron upside down and allow water to drain out.

AFTER THE IRONING 

•  Disconnect the plug of the iron from the socket. 

•  Empty the reservoir by turning the iron upside down and 

gently shaking it. 

•  Leave the iron to cool down completely. 

•  Roll up the power cord with the rewinder. 

•  Always store the iron in a vertical position.

ADVICES FOR GOOD IRONING

We recommend using the lowest temperatures with fabrics that have unusual 

finishes (sequins, embroidery, flush, etc.). 
If the fabric is mixed (e.g. 40% cotton 60% synthetics), set the thermostat to 

the temperature of the fiber requiring the lower temperature. 
If you don’t know the composition of the fabric, determine the suitable 

temperature by testing on a hidden corner of the garment. Start with a low 

temperature and increase it gradually until it reaches the ideal temperature. 
Never iron areas with traces of perspiration or other marks: the heat of the 

plate fixes the stains on the fabric, making them irremovable. 
The size is more effective if you use a dry iron at a moderate temperature: 

excess heat scorches it with the risk of forming a yellow mark. 
To avoid marking silk, woolen or synthetic garments shiny, iron them inside 

out. 

To avoid marking velvet garments shiny, iron in one direction (following the 

fiber) and do not press down on the iron. 
The heavier the washing machine is loaded, the more garments come out 

creased. This also happens when the spin-drying revolutions are very high.
Many fabrics are easier to iron if they are not completely dry.

For example, silk should always be ironed damp.