Ardesto IR-B2235 - Инструкция по эксплуатации - Страница 19

20

EN

only after the light has gone off.

DRY IRONING

To iron without steam, follow the instructions in section “steam ironing”, leaving 

the steam regulator (C) to the 

«OFF»

 position.

The steam iron can be used on the dry setting with or without water in the water 

tank, it is best to avoid having the water tank full while dry ironing.

SPRAY FUNCTION

Make sure that there is water in the reservoir. Press the spray button (D) slowly 

(for a dense spray) or quickly (for a vaporized spray)

 [Fig. 6]

.

Warning: for delicate fabrics, we recommend moistening the fabric 

beforehand using the spray function (D), or putting a damp cloth between the 

iron and the fabric. To avoid staining, do not use the spray on silk or synthetic 

fabrics.

CLEANING 

Please note: before cleaning the iron in any way, make sure 

that the appliance plug is not connected to the socket.

Any deposits, starch residue or size left on the plate can be 

removed using a damp cloth or an unabrasive liquid detergent. 

Avoid scratching the plate with steel wool or metallic objects. 

The plastic parts can be cleaned with a damp cloth then wiped 

over with a dry cloth.

SELF-CLEANING 

The self-cleaning feature cleans inside the plate, removing impurities. We 

recommend using it every 10-15 days.

Directions: 

•  Fill the reservoir up to the maximum level indicated and set the steam 

regulator (C) to the 

«OFF»

 position. 

•  Set the temperature control dial (H) to the maximum temperature and wait 

for the indicator light (G) to turn off. 

•  Pull the plug out of the socket and hold the iron horizontally over the sink. 

•  Push the steam regulator (С) to the self-clean position and hold on it until 

all the boiling water, steam, impurities come out 

[Fig. 7]

.